Installation Manual

10Gig™ SFP+ Copper Cable Assembly Installation Guidelines PN533B
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
E-mail:
[e-mail]
Phone:
866-405-6654
Page 7 of 7
Using Middle of Row switching topology, an 8 cabinet row
may be achieved with 7m cables. This has two switch
cabinets in the center and 3 server cabinets on each side.
If all switching were placed in a single center cabinet, a 9
cabinet row with 8 server cabinets may be covered. To
enable longer row, fiber and SFP+ optical transceivers are
required. A hybrid solution of Panduit
®
10Gig™ SFP+
copper for the inner cabinets and Panduit
®
10Gig™ OM3
fiber to the outer cabinets will be the cost effective solution.