Installation Manual

10Gig™ SFP+ Copper Cable Assembly Installation Guidelines PN533B
Panduit Corporation, 2011 Page 2 of 7
Standard Cable Part Numbers
Part Number Length* Cable Gauge Nominal Cable O.D. Weight/pc
PSF1PXA0.5M** 0.5m (1.6 ft.) 30 AWG 4.1mm (0.161 in.) 0.10 lb.
PSF1PXA1M** 1.0m (1.6 ft.)
30 AWG 4.1mm (0.161 in.) 0.13 lb.
PSF1PXA1.5M** 1.5m (4.9 ft.)
30 AWG 4.1mm (0.161 in.) 0.16 lb.
PSF1PXA2M** 2.0m (6.6 ft.)
30 AWG 4.1mm (0.161 in.) 0.19 lb.
PSF1PXA2.5M** 2.5m (8.2 ft.)
30 AWG 4.1mm (0.161 in.) 0.22 lb.
PSF1PXA3M** 3.0m (9.8 ft.)
30 AWG 4.1mm (0.161 in.) 0.25 lb.
PSF1PXA3.5M** 3.5m (11.5 ft.) 30 AWG 4.1mm (0.161 in.)
0.28 lb.
PSF1PXD4M** 4.0m (13.1 ft.) 24 AWG 6.0mm (0.236 in.)
0.49 lb.
PSF1PXD4.5M** 4.5m (14.4 ft.) 24 AWG 6.0mm (0.236 in.)
0.50 lb.
PSF1PXD5M** 5.0m (16.4 ft.) 24 AWG 6.0mm (0.236 in.)
0.60 lb.
PSF1PXD5.5M** 5.5m (17.6 ft.) 24 AWG 6.0mm (0.236 in.)
0.62 lb.
PSF1PXD6M** 6.0m (19.7 ft.) 24 AWG 6.0mm (0.236 in.)
0.70 lb.
PSF1PXD6.5M** 6.5m (20.8 ft.) 24 AWG 6.0mm (0.236 in.)
0.71 lb.
PSF1PXD7M** 7.0m (23.0 ft.) 24 AWG 6.0mm (0.236 in.)
0.81 lb.
* Panduit
®
10Gig™ SFP+ copper cables have a length tolerance of + .15 - 0m
** Add cable color code to end of part number, BU for Blue, WH for White, BL for Black.
Cable Length Deployment Note
Note that the Panduit
®
10Gig™ SFP+ Direct Attach Cable Assembly lengths are measured from cable
connector tip- to-tip. However, much of the connector is inserted into the host port. Therefore one may
wish to add approximately 47mm or 1.87 in. to each end or approximately 0.1m total to port-to-port length
and cord routing calculations.
Connector EEPROM
Panduit
®
10Gig™ SFP+ Direct Attach Copper Cable Assemblies are intelligent cables. The connector
has an integrated EEPROM with information populated in registers that is provided to the active
equipment when queried through an I
2
C bus Most active equipment port allow for interchangeable types
of me to be plugged into its ports. The registers in the EEPROM provide a method for the connector to
identify itself as an SFP+ passive copper module to allow the active equipment to operate in the proper
mode. Other information contained in the memory registers includes vendor name (Panduit), part
number, serial number, and cable length in meters.