Submittal

Data Center Wizard
91
The Next button is only enabled in Data Center Project when at least one grounding cable is created. Clicking the
button will take you to the Power Labels screen.
Clicking "Finish" will prompt you to save all data from the session. If you has selected the "Default" project, you will be
prompted to create a new project if desired.
Output: The legend format for output from this screen will be in the form "f1s1-TMGB"
Page 12: Power Labels
You will be taken to the Grounding Labels screen from the "Format Selection" page (non-Data Center Project) or
Equipment Cord screen (Data Center Project).
All fields are optional, but at least one must be entered before being able to create a legend. The legend will be
generated using all entered values, separated by a dash "-" in the same order the fields appear on the screen: POU,
Distribution Panel, Circuit ID.
Project: This field functions the same as on previous screens.
Power Outlet Unit, Distribution Panel, and Circuit ID: All fields are mandatory to generate the legends for the
power labels.
Add: When a power label value is entered, the Add button will be enabled. Clicking it will add the power label to the
Power Label list.