Submittal

Data Center Wizard
87
You will be taken to the Equipment Labels screen from the "Format Selection" page (non-Data Center Project) or
Cable Labels screen (Data Center Project).
Equipment Name: The only required field on the screen, this field allows you to enter any value for a piece of
equipment.
Equipment Type: This dropdown will contain entries for Servers, Routers, and any other types identified as being
needed.
Project and Room Grid: These fields function the same as on previous screens.
Rack and Rack Space: The fields will be text boxes (non-Data Center Project) or dropdowns (Data Center Project). If
Data Center Project, the dropdowns will contain a list of all defined racks and panels. The panel dropdown will contain
only those panels defined for the selected rack. The panel dropdown will only be enabled when a rack is selected.
You will also be able to type in the values directly. Validation will be done when you add the equipment to the list to
ensure the values entered exist in the list.
"More >>" Button: Clicking on the "More >>" button will display the two optional fields for this screen, Floor and
Space. When clicked, the button will change to "Less <<" Clicking on this button will hide the optional fields, but leave
any information entered in them.
Floor and Space: Both fields are optional, but will be used for identification only.
Add: When an equipment value is entered, the Add button will be enabled. Clicking it will add the equipment to the
Equipment list.