Submittal

Data Center Wizard
85
You will be taken to the Cable Labels screen from the "Format Selection" page (non-Data Center Project) or Ports
(Data Center Project).
Project and Room Grid: These fields function the same as on previous screens.
Cable Type: The dropdown will contain "Copper" and "Fiber" Selecting Fiber will activate a tool tip over the input
fields reminding you to include the sub-panel identifier in the range fields. If in direct mode, this field will be disabled
and set to that value selected on the Format Selection screen.
Cable Diameter: This dropdown contains a list of values associated with the selected cable type. If in direct mode,
this field will be disabled and set to that value selected on the Format Selection screen.
From Rack and Panel (and To): Both fields are required. The fields will be text boxes (non-Data Center Project) or
dropdowns (Data Center Project). If Data Center Project, the dropdowns will contain a list of all defined racks and
panels. The panel dropdown will contain only those panels defined for the selected rack. The panel dropdown will
only be enabled when a rack is selected. You will also be able to type in the values directly. Validation will be done
when you add the ports to the list to ensure the values entered exist in the list.
From Range and To (and To Range): You can enter the port range for the From rack and panel.
"More >>" Button: Clicking on the "More >>" button will display the two optional fields for this screen, Floor and
Space. When clicked, the button will change to "Less <<" Clicking on this button will hide the optional fields, but leave
any information entered in them.
Floor and Space: Both fields are optional, but will be used in the legends for the ports if available.
Flag Mode: Dropdown so that you may select None, Flag Marker, Reflected (N), or Reflected (F).