Submittal

EASY-MARK
52
Page 4: TIA-606-A
If the user selects the option TIA-606-A in the legend generation page, then the following screen is shown. Here is a
sample screen:
The top section of this dialog shows data entry fields which allow the user to enter the legend information. The bottom
section shows a summary/preview of the legends which will be generated.
The user selects the class and identifier from the drop downs. Depending on these selections, data entry boxes will be
greyed out as appropriate. The entry fields pertinent to each class/identifier selection are defined in the TIA-606A
standards. Each entry field will provide a tool tip help containing the TIA-606-A convention for this field. The data
format for each field is only a suggestion and will not be enforced.
The user enters his input in the top section of each TIA-606-A wizard panel. The user clicks the "Add" button to include
the legends to be generated on labels. This transfers the input from the top section to the summary table. Where
there is only one label, the Series Start will show this value, and where a range of labels are generated then the Start
and End of the Series will be shown in this table. The data entry fields in the top section are cleared out to prepare for
a new set of input data. The generated legends adhere to the conventions of the TIA-606-A standard.
The user can select a line in the summary table in order to edit this line. The data entry elements in the top section of
the page will be populated with the information from the selected line in the table. The user enters the modifications
and clicks the "Update" button to send the modified data back to the summary table. If the user clicks the "Add" button
after editing a line, a new line will be added to the summary table.