Technical Bulletin

18900Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMV1OL
06APR16
4
Technical Data Sheet
Page 1 of 2  2016 PANDUIT Corp
TDS: GMV1OL
Preprinted Laminated Vinyl Film
This specification is intended to outline the physical and chemical properties of PANDUIT’s pressure sensitive preprinted RoHS
compliant laminated vinyl material and include the following part numbers and printable material identifiers:
Part Number Prefixes
PESW*Y
PESG
PESF
PESH
PESV
WL36Y
WL35Y
PRODUCT SPECIFICATIONS:
Description:
Material is RoHS compliant (European Union directive 2002/95/EC). GMV1OL consist of a
1.5 mil overlaminant laminated to a 4.0 mil vinyl film.
Print Methods:
This material is preprinted.
Adhesive:
Acrylic based, pressure sensitive permanent adhesive.
Standard Colors:
White, Yellow, Orange, Red, Blue and Green
Thickness:
5.5 +/- 0.5 mils (total laminated construction)
Service Temperature
Range:
-40°F to 176°F (-40°C to 80°C)
Minimum Application
Temperature:
50°F (10°C)
Storage Conditions:
Store at 70°F (21°C) and 50% Relative Humidity.
PROPERTIES:
PERFORMANCE:
Peel Adhesion to Stainless
Steel:
40 oz/in width minimum (PSTC-101, 15 min. dwell)
Shear Adhesion:
24+ hours (PSTC-107, Procedure A)
Tensile Strength:
MD 48 +/- 4.8 lbs./inch width (PSTC-131)
TD 37 +/- 3.7 lbs./inch width (PSTC-131)
Elongation:
MD 90% +/- 10% (PSTC-131)
TD 145% +/- 10% (PSTC-131)
Elevated Temperature
Exposure:
After 8 hours at 150°F (65.5°C) there was no deterioration of the substrate
Tack:
425 g/cm
2
(ASTM D-2979-71, 1 sec dwell)
UV Resistance: *3000 hours no change observed (ASTM G154)
*3000 hours equates to 5 years of assimilated outdoor UV exposure.