Datasheet

18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMC4
10MAY17
7
Technical Data Sheet
Page 2 of 2  2006 PANDUIT Corp
TDS: GMC4
CHEMICAL/SOLVENT RESISTANCE:
Samples were thermal transfer printed with Panduit RMH4BL ribbon. These samples were laminated to flat steel
panels and also wrapped around a 1/12” OD wire. Test was conducted at room temperature after 24 hour dwell. The
samples were immersed in the specified chemical reagents for 5 immersions using the following cycle: a 10 minute
immersion time followed by a 30 minute recovery time. After the final immersion the flat samples were rubbed 10
times with a lint free gauze.
Visual Observation
Chemical Reagent
Substrate / Adhesive
Thermal Transfer Printed
Legend
Distilled Water
No effect
No effect
Mineral Spirits
Slight adhesive bleed
No effect
ASTM #3 Oil
No effect
No effect
Isopropyl Alcohol
Significant adhesive bleed
Loss of print legibility
Methanol
No effect
Loss of print legibility
3% Alconox Detergent
No effect
No effect
10% Sodium
Hydroxide Solution
No effect
Loss of print legibility
10% Sulfuric Acid
Solution
No effect
No effect
5% Sodium Chloride
Solution
No effect
No effect
Freon TF
Significant adhesive bleed
No effect
Super Agitene
Slight adhesive bleed
Loss of print legibility
Jet-A Fuel
Slight adhesive bleed
Loss of print legibility
Arco TruSlide 68
No effect
No effect
SAE 30 Motor Oil
No effect
No effect
APPROVALS
UL Recognized: UL 969
File Number:
MH 14979, MH 14576
CUL Recognized: C22.2 No 0.15-01
File Number:
MH 14576
LIMITED WARRANTY
All PANDUIT Identification Solution Products (except for Software programs) are warranted to be free from defects in material and workmanship
at the time of sale but our obligation under this warranty is limited to replacement of the product proved to be defective within 6 months from the
date of sale, or in the case of printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified, altered
or misused in any way. Use of PANDUIT printers with any product other than the specified PANDUIT products for which the printer was designed
constitutes misuse. Before using, the user shall determine the suitability of the product for its intended use and user assumes all risk and
liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers of seller and
manufacturer.
NEITHER PANDUIT NOR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE, WHETHER DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE THE PRODUCT OR THE PRINTER.
THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE ARE SPECIFICALLY EXCLUDED.
The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a guide or
use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in
connection with its use. Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to
operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.