Drawing

Order number of pieces required, in multiples of Standard Package Quantity.
K.20
Cable/ConduitBeam/PurlinHangers/Hanging
Systems
Stud WallCommunication/
Low Voltage
Dry WallAcousticalMiscellaneousIndex
Sizing Information
Reference
Codes & Standards
Reference
Standard Method of Test for Surface Burning Characteristics of
Floor Coverings, and Miscellaneous Material and Assemblies,
CAN/ULC-S102.2-M88.
On April 1, 2004,  re tests were conducted at our ULC Toronto
facilities in accordance with the Standard CAN/ULC-S102.2-03,
Standard Method of Test for Surface Burning Characteristics of Floor
Covering, and Miscellaneous Materials and Assemblies.
LISTED
Plastic
Materials
15KH
Listed in accordance with CAN/ULC-S102.2
Flame Smoke
Spread Developed
0 35
15KH = The control number assigned by ULC.
0 = The Flame Spread rating assigned by ULC.
35 = The Smoke Developed value assigned by ULC.
The J-Pro
™
(JP2 and JP2W) products may be marked with the
Flame Spread and Smoke Developed values as shown above when
mounted as single units or pairs with a minimum spacing of 1220mm.
These parts may be fastened to metal clips to product the following
part number (with the same mounting requirements above), which
may also bear the ULC mark:
JP2HBC25RB- JP75DW- JP75SBC87- JP131CP-
JP4HBC50RB- JP2HBC50RB- JP75SBC50- JP75SBC87RB-
JP131UF100- JP4HBC75RB- JP2HBC75RB- JP75SBC50RB-
JP131CMB- JP131WP2B- JP4ZP- JP2HBC25RB-
JP2ZP- JP75HBC25RB- JP131DW- JP131SBC87-
JP4CP- JP2HBC50RB- JP2CP- JP75HBC50RB-
JP131SBC50- JP131SBC87RB- JP4UF100- JP2HBC75RB-
JP2UF100- JP75HBC75RB- JP131SBC50RB- JP4W-
JP4WP2B- JP2CMB- JP2WP2B- JP75ZP-
JP131HBC25RB- JP4CMB- JP4SBC87- JP2DW-
JP2SBC87- JP75CP- JP131HBC50RB- JP4SBC50-
JP4SBC87RB- JP2SBC50- JP2SBC87RB- JP75UF100-
JP131HBC75RB- JP4SBC50RB- JP2SBC50RB- JP75CMB-
JP75WP2B- JP131ZP- JP4HBC25RB-