Drawing

Order number of pieces required, in multiples of Standard Package Quantity.
K.18
Cable/ConduitBeam/PurlinHangers/Hanging
Systems
Stud WallCommunication/
Low Voltage
Dry WallAcousticalMiscellaneousIndex
Sizing Information
Reference
Codes & Standards
Reference
UL
File E136577
Volume 2, Section 2
Page 1
ULC
File R21673
Volume 1
Description
Product Covered:
USL, CNL – Positioning Devices – Model JP2, JP4, JP75, JP131
General Description:
USL, CNL – Indicates that the products have been evaluated in
accordance with the requirements in UL 1565 and CAN/CSA C22.2
No. 18.5-02 Standards for Positioning Devices.
These devices are a J-Pro
TM
J-hook, and are used in applications
where zone conduit, cable trays, or ladder racks are not available or
applicable.
The J-Pro
TM
J-hook contains a family of parts. This system has
several other brackets and/or components, manufactured from a
high-carbon plated steel, riveted to the JP2, JP4, JP75, and JP131
for a variety of applications.
Ratings:
These devices are rated 60°C, for indoor use, suitable for use in air
handling spaces in accordance with Sec. 300.22 (C) and (D) of the
National Electrical Code in single units or pairs, and 30 lb. maximum
load rating.
Ratings:
These devices are rated 60°C, for indoor use, suitable for use in air
handling spaces in accordance with Sec. 300.22 (C) and (D) of the
National Electrical Code, and 100 lb. maximum load rating in single
unit confi guration only.
Table 1
Family of Part
Numbers
J-Pro
TM
Cable Support
System Description
JP2 J-Pro
TM
J-hook
Table 3
Family of Part
Numbers
J-Pro
TM
Cable Support
System Description
JP4 J-Pro
TM
J-hook