Drawing

ManualsBrandsPanduit ManualsConnectorsRing Terminal, high temperature, non-ins

For more information

Visit us at www.panduit.com

Contact Customer Service by email: cs@panduit.com

or by phone: 800-777-3300

Printed in the U.S.A.

Catalog Number WACB24--SA-ENG

9/2013

Panduit Corporate

World Headquarters

Tinley Park, Illinois 60487

Panduit

StrongHold

™

Electrical/Network Supports and Fasteners

(1P)WACB24--SA-ENG

Summary of content (124 pages)

PAGE 1
Tinley Park, Illinois 60487 For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 (1P)WACB24--SA-ENG © 2013 Panduit Corp. ALL RIGHTS RESERVED Printed in the U.S.A.
PAGE 2
Contractor Solutions for Electrical and Networking Installations Panduit is committed to providing our contractor partners a comprehensive portfolio of products, programs, and services to help increase job site productivity, improve back-office operations, and accelerate cash flow. Our collaborative approach addresses Panduit is a global leader in cabling and communication products, delivering end-to-end solutions in support of demanding electrical and networking requirements.
PAGE 3
StrongHold™ Electrical/Network Supports and Fasteners Panduit electrical/network supports and fasteners provide a reliable, high-quality solution for routing and securing power and communication cabling within commercial and industrial facilities. StrongHold™ Supports and Fasteners are designed to meet the regulatory requirements of NFPA 70 (National Electric Code), UL standards, and other USA/Canadian building codes. For service and technical support, call 886-405-6654 or visit www.panduit.com.
PAGE 4
Table of Contents A. Cable/Conduit . . . . . . . . . . . . . Pages A.1 – A.18 B. Beam/Purlin . . . . . . . . . . . . . . Pages B.1 – B.12 C. Hangers/Hanging System . . . . . Pages C.1 – C.2 D. Stud Wall . . . . . . . . . . . . . . . . . Pages D.1 – D.18 E. Communication/ Low Voltage . . . . . . . . . . . . . . . . Pages E.1 – E.14 Sample product applications; for more information see product sections.
PAGE 5
Table of Contents F. Dry Wall . . . . . . . . . . . . . . . . . . . Pages F.1 – F.2 G. Acoustical . . . . . . . . . . . . . . . Pages G.1 – G.10 H. Miscellaneous . . . . . . . . . . . . . Pages H.1 – H.4 J. Sizing Information Reference. . . . . . . . . . . . . . . . . . . Pages J.1 – J.8 K. Codes and Standards Reference. . . . . . . . . . . . . . . . . . Pages K.1 – K.20 L. Part Number Index . . . . . . . . . . Pages L.1 – L.4 For service and technical support, call 866-405-6654 or visit www.panduit.
PAGE 6
Related Products Identification and Labeling Solutions A global leader in reliable and innovative solutions for identification and safety, Panduit offers a complete leading-edge line of labeling software, high-performance label materials (all RoHS compliant), and printers that provide enhanced productivity, dependability, and value to all infrastructure labeling requirements.
PAGE 7
Related Products Grounding The complete selection of Panduit compression and mechanical grounding connectors provides high-quality, fast, and safe connections. Each part works with a range of wire sizes and combinations to help minimize inventory requirements and save cost. Connectors meet all applicable grounding and bonding approvals to ensure high performance and reliability. Direct Burial Grounding System meets the stringent requirements of IEEE Std. 837-2002 for corrosion resistance.
PAGE 8
Related Products Safety Solution The Panduit safety solution includes the product systems (lockout devices, facility safety signage, labels and software), as well as expertise in workplace safety compliance (services and training DVD) to help customers understand and comply with workplace safety regulations. These safety-compliant systems offer a comprehensive workplace safety solution to aid customers in compliance with OSHA standards.
PAGE 9
Related Products Tools Speed installation, maximize productivity, and decrease the risk of downtime with reliable Panduit tools for crimping, bundling, cutting, etc. NetKey® Network Components The NetKey® Copper and Fiber Cabling System provides a complete, standards-compliant cabling infrastructure solution for voice, data, and video applications. NetKey® Modules feature the universal “keystone” design and are compatible with a wide assortment of modular patch panels, faceplates, and surface mount boxes.
PAGE 10
Notes viii
PAGE 11
Cable/Conduit Beam/Purlin Cable/Conduit Snap-Close Conduit Clips Hangers/Hanging Systems • No fastener required to retain conduit • Static load capacity: - 100 lbs. in vertical position - 25 lbs. in horizontal position Image 1 Stud Wall 1 2 Mounting Hole (In.) 1/4 non-threaded 1/4-20 threaded 1/4 non-threaded Std. Pkg. Qty. 100 100 100 100 100 100 100 Miscellaneous Sizing Information Codes & Standards Reference Reference *Or 14-2 through 12-3 MC/AC cable. **Not UL or cUL listed.
PAGE 12
Cable/Conduit • No fastener required to retain conduit • Static load capacity: - 25 lbs. in vertical position - 15 lbs. in horizontal position • Available with 1/4" non-threaded mounting hole Part Number P8P P12P P16P Fits EMT (In.) 1/2 3/4 1 Fits Rigid/IMC (In.) – 1/2 3/4 Std. Pkg. Qty.
PAGE 13
Cable/Conduit Suspend conduit from bottom of beam Will pivot 360° Hammer-on installation Static load capacity: 75 lbs. vertically Miscellaneous Sizing Information Codes & Standards Reference Reference 100 Acoustical 2 Dry Wall 9/16 – 3/4 Std. Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Communication/ Low Voltage P32M912 Fits EMT/Rigid/IMC (In.
PAGE 14
Cable/Conduit • • • • Suspend conduit from side of beam Will pivot 360° Hammer-on installation Static load capacity: 25 lbs. vertically Flange Thickness Part Number (In.
PAGE 15
Cable/Conduit Image 1 Stud Wall Image 2 Fits EMT (In.) 1/2 1/2 1/2 3/4 3/4 Fits Rigid/IMC (In.) — — — 1/2 1/2 Std. Pkg. Qty.
PAGE 16
Cable/Conduit • Support MC, AC, or BX cable from #12 – #8 wire in horizontal or vertical position • No static load rating – for positioning only • Can also be used for flexible metallic tubing, armored cable, portable cables, and control tubes • See chart below for installation configurations Part Number Description PKX* Cable clip to support MC, AC, or BX cable from drop wire. PK8 Conduit clip to support 1/2" EMT from drop wire, rod, or flange. Std. Pkg. Qty. 100 100 *Not UL or cUL listed.
PAGE 17
Cable/Conduit 100 100 Dry Wall *Not UL or cUL listed. #8 – 3/16" – 1/8"– 5/16"– 9/16"– #9 1/4" 1/4" 1/2" 3/4" Wire Rod Flange Flange Flange PK8 PK8 PK8 PK12 PK12 PK12 PK12 PK12 PK12 PK16 3/4 EMT 3/4 Rigid 1 EMT 1 Rigid 1 1/4 EMT PK12 PK12 – – – PK12 PK12 PK16 – PK20 PK12 PK16 PK16 PK20* PK20 PK16 PK20* PK20* PK20* – PK16 PK20* PK20* PK20* – *For horizontal applications only.
PAGE 18
Cable/Conduit Beam/Purlin Image 2 Image 3 • Components and assemblies used to secure conduit and devices to drop wire, rod, or flanges • P4Z34 and assemblies fit 1/8" – 3/8" flanges and attach to #12 wire through 3/8" rod • P6Z34 fits 1/8" – 7/16" flanges and attaches to #12 wire through 3/8" rod with improved performance • No static load rating – for positioning only Part Number P4Z34* P6Z34 P4Z348P Image No. 1 1 2 Fits EMT (In.) — — 1/2 Fits Rigid/ IMC (In.) — — — Std. Pkg. Qty.
PAGE 19
Cable/Conduit 1 to 1 1 1/4 to 1 1 1/2 to 1 100 100 100 P1616M P1620M P1624M *Or 14-2 through 12-3 MC/AC cable. Communication/ Low Voltage Std. Pkg Qty. 100 100 Stud Wall Part Number P166M P16812M Fits EMT/Rigid/IMC (In.) 3/8* to 1 1/2 – 3/4 to 1 Hangers/Hanging Systems • Designed to quickly secure one conduit run to another • No fasteners required • Static load capacity: Total trapeze must not exceed 100 lbs.
PAGE 20
Cable/Conduit • Used to mount conduit to strut • All sizes available with load distribution saddle attached to screw to distribute weight • Suitable for use with standard 1 5/8" strut • Install with screwdriver, nut driver, or standard wrench Part Number PSCH6B PSCH8B PSCH12B PSCH16B PSCH20B PSCH24B PSCH32B PSCH40B PSCH48B PSCH56B PSCH64B PSCH72B Fits EMT (In.) 3/8 1/2 3/4 1 1 1/4 1 1/2 2 — 2 1/2 3 3 1/2 4 Fits Rigid/IMC (In.) — — 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 Static Load Capacity (Lbs.
PAGE 21
Cable/Conduit Beam/Purlin Universal Strut Clamps Std. Pkg. Qty. 100 100 100 100 50 50 50 50 25 25 Communication/ Low Voltage Dry Wall Static Load Rating (Lbs.) 200 200 200 200 200 200 350 350 350 350 Stud Wall Part Number PSK85I PSK125I PSK165I PSK205I PSK245I PSK325I PSK405I PSK485I PSK565I PSK645I Fits EMT/Rigid/IMC (In.
PAGE 22
Beam/Purlin Cable/Conduit Image 1 • Secure 3/8" conduit (MC/AC cable) and 4" square boxes to most structures • Provide 3/8" conduit (MC/AC cable) support on both sides of electrical box • Available in a variety of mounting configurations Image 2 Part Number P6MB18 P6MB18A P812MB18 P812MB18A P812MB1824 Image 3 Image Mounting No.
PAGE 23
Cable/Conduit P16MB18 25 Stud Wall P16MB18A Std. Pkg. Qty. 25 Hangers/Hanging Systems Part Number P812MB18S 25 Communication/ Low Voltage Fits EMT/ Image Mounting Rigid/IMC No. Method (In.
PAGE 24
Cable/Conduit • Suitable for flexible conduit and all types of cable • Support cable from 1/16" – 1/2" flange • No static load rating – for positioning only • Clip “snaps” on flange and cable “snaps” into clip Part Number PSC2A PSC2B PSC2C PSC2D PSC2E PSC2F PSC2G PSC4A PSC4B PSC4C PSC4D PSC4E PSC4F PSC4G PSC8A PSC8B PSC8C PSC8D PSC8E PSC8F PSC8G AC/MC Cable O.D. (In.) 0.22 – 0.28 0.31 – 0.38 0.38 – 0.44 0.47 – 0.56 0.50 – 0.72 0.75 – 0.94 0.97 – 1.25 0.22 – 0.28 0.31 – 0.38 0.38 – 0.44 0.47 – 0.56 0.
PAGE 25
Cable/Conduit Beam/Purlin Flexible Cable Clip Std. Pkg. Qty. 100 Cable Size (In.) 12-2 (0.47 – 0.51 O.D.) 12-3 (0.49 – 0.54 O.D.) 14-2 (0.43 – 0.48 O.D.) 14-3 (0.46 – 0.50 O.D.
PAGE 26
Cable/Conduit Beam/Purlin • Properly space and support MC/AC cable • Prevent derating of electrical cable • Comply with NEC Article 310.15 (reference pages K.4 – K.5 for details) Image 1 Stud Wall Hangers/Hanging Systems Support Brackets for MC/AC Cable Part Number PMCS50 PMCS100 PMCS101 Image No. Capacity 1 Up to 4 runs of MC/AC cable 0.43" – 0.56" in diameter 2 Up to 8 runs of MC/AC cable 0.43" – 0.56" in diameter 2 Up to 7 runs of MC/AC cable 0.56" – 0.69" in diameter Std. Pkg. Qty.
PAGE 27
Cable/Conduit Beam/Purlin Nail/Conduit Brackets Hangers/Hanging Systems • Attach conduit to wood, steel, and concrete • Eliminate offset bends on 1 1/2" box • No static load rating – for positioning only • May be attached after positioning conduit Image 1 Stud Wall Image 2 Std. Pkg. Qty. 100 100 100 Dry Wall Fits Rigid/IMC (In.) 1/2 – 3/4 — 1/2 Communication/ Low Voltage Part Number PCNB812M PCNB8P PCNB12P Fits EMT Image No. (In.
PAGE 28
Cable/Conduit • Provide spacing between conduit and deck surface • Eliminate offset bends on 2 1/8" box • No static load rating – for positioning only • May be attached after positioning conduit Part Number PAOL8P PAOL12P PAOL16P Fits EMT (In.) 1/2 3/4 1 Fits Rigid/IMC (In.) — 1/2 3/4 Std. Pkg. Qty.
PAGE 29
Cable/Conduit Screw-On Beam Clamps PBC Hangers/Hanging Systems • Attach to beam with screw • Install with screwdriver, nut driver, or standard wrench • Incorporate tapped holes to accommodate threaded rod Beam/Purlin Beam/Purlin Stud Wall PBC400 Up to 1/2 Up to 15/16 100 Zinc Plated Steel 50 200 Zinc Plated Steel 25 *3/8" non-threaded clearance hole in top and bottom; 1/4" non-threaded clearance hole in back. **UL and cUL listed.
PAGE 30
Cable/Conduit • Hammer-on installation • Attachment tab provides 1/4" clearance hole for wire, S-hooks, or chain assemblies • Static load capacity: 200 lbs. Part Number P4H24 P4H58 P4H912 Flange Thickness (In.) 1/8 – 1/4 5/16 – 1/2 9/16 – 3/4 Std. Pkg. Qty.
PAGE 31
Cable/Conduit Stud Wall Image 2 Flange Thickness (In.) 1/8 – 1/4 5/16 – 1/2 9/16 – 3/4 1/8 – 1/4 5/16 – 1/2 9/16 – 3/4 Std. Pkg. Qty. 100 100 100 100 100 100 Dry Wall Image No.
PAGE 32
Cable/Conduit Beam/Purlin • Easily attach conduit to beams • Can be installed on flange up to 1/2" thick • Include snap-close or push-fit conduit fittings Image 1 Image 2 Part Image Number No. PBC8P 1 PBC12P 1 PBC16P 1 PBC8PSM 2 PBC12PSM 2 PBC16PSM 2 PBC812M 3 PBC16M 3 PBC20M 3 PBC24M 3 PBC32M 3 PBC812MSM 4 PBC16MSM 4 PBC20MSM 4 PBC24MSM 4 PBC32MSM 4 Image 3 Fits EMT (In.) 1/2 3/4 1 1/2 3/4 1 1/2 – 3/4 1 1 1/4 1 1/2 2 1/2 – 3/4 1 1 1/4 1 1/2 2 Image 4 Static Fits Load Rigid/IMC Rating (In.) (Lbs.
PAGE 33
Cable/Conduit Fits Rigid/IMC (In.) 3/4 1 — 1 1/4 1 1/2 2 Std. Pkg. Qty. 100 100 100 100 50 50 Communication/ Low Voltage Fits EMT (In.) 3/4 1 1 1/4 1 1/2 — 2 Stud Wall Part Number PBC200CD1B PBC200CD2B PBC200CD2.
PAGE 34
Cable/Conduit Beam/Purlin • Hammer-on beam clamps allow for easy installation • Options available for threaded or non-threaded rod • Options available for flanges 1/8" – 3/4" thick • Static load capacity: 160 lbs. Image 1 Image 2 Image 3 Part Number P6TI24 P4TI58 P6TI58 P6TI912 P4TI24 P4TI912 P6TA24* Image No. 1 1 1 1 1 1 2 Flange Thickness (In.
PAGE 35
Cable/Conduit Stud Wall PAF14 Flange Orientation Vertical Angled Std. Pkg. Qty. 100 100 Communication/ Low Voltage Part Number PVF14 PAF14 Hangers/Hanging Systems PVF14 • Fasteners fit flanges 1/16" – 1/4" thick • Support wire and assemblies from vertical or angled flanges • Hammer-on installation • Material: spring steel • Static load capacity: 100 lbs.
PAGE 36
Cable/Conduit • Provide a method for attaching conduit and boxes to angled flanges • Installed by hand without the use of power tools • Static load capacity: 100 lbs. Hangers/Hanging Systems Beam/Purlin Z-Purlin Clips P123 Part Number P122 P123 Description 1/4" hole for wire, S-hooks, and jack chain. 1/4" hole in bottom for assemblies. Std. Pkg. Qty.
PAGE 37
Cable/Conduit Std. Pkg. Qty. 100 100 100 Communication/ Low Voltage Rod Size 1/4-20 threaded 3/8-16 threaded 1/4" – 3/8" requires nuts Stud Wall Part Number PVF144TI PVF146TI PVF146T Hangers/Hanging Systems • Suspend threaded rod and drop wire from vertical flange • Hammer-on installation • Material: spring steel • Static load capacity: 160 lbs.
PAGE 38
Cable/Conduit Beam/Purlin • Provide a method for attaching conduit to angled flanges • Installed by hand without the use of power tools Image 1 Image 2 Part Number P1238P P12312P P12316P P1236M P123812M P12316M* P12320M Image No. 1 1 1 2 2 2 2 Fits EMT (In.) 1/2 3/4 1 3/8 1/2 – 3/4 1 1 1/4 Static Fits Load Rigid/IMC Rating (In.) (Lbs.) — 25 1/2 25 3/4 25 3/8 100 1/2 – 3/4 100 1 100 1 1/4 100 Std. Pkg. Qty. 100 100 100 100 100 100 100 *UL and cUL listed.
PAGE 39
Cable/Conduit Beam/Purlin Z-Purlin Clip Assemblies for Threaded Rod and Drop Wire Applications Hangers/Hanging Systems • Provide a method for attaching conduit and boxes to angled flanges • Installed by hand without the use of power tools • Static load capacity: 100 lbs. Image 1 Stud Wall Image 2 Rod Size 1/4-20 threaded 3/8-16 threaded 1/4" – 3/8" threaded; requires nuts Std. Pkg. Qty. 100 100 100 Dry Wall Image No.
PAGE 40
B.12 Index Codes & Standards Sizing Information Reference Reference Miscellaneous Acoustical Dry Wall Communication/ Low Voltage Stud Wall Hangers/Hanging Systems Beam/Purlin Notes Order number of pieces required, in multiples of Standard Package Quantity.
PAGE 41
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Rod and Wire Hangers with Bracket Supports Hangers/Hanging Systems Image 1 • Suspend #8 wire, 1/4", and 3/8" non-threaded or threaded rod from overhead mountings • 1/4" clearance hole in right angle and offset brackets • Static load capacity: 160 lbs. Stud Wall Image 4 Image 5 1 P6TB 2 P6AO 3 P4TIO 4 P6TIO 4 P6TO 5 Std. Pkg. Qty.
PAGE 42
Cable/Conduit Beam/Purlin • Support pipe or duct from flange with banding or strapping up to 1" wide • Options available for beams 1/8" – 3/4" thick • Hammer-on installation • Static load capacity: 200 lbs. Image 1 Stud Wall Hangers/Hanging Systems Strap Hangers Part Number PMSS24 PMSS58 PMSS912 PMSR24 PMSR58 PMSR912 Image No. 1 1 1 2 2 2 Flange Thickness (In.) 1/8 – 1/4 5/16 – 1/2 9/16 – 3/4 1/8 – 1/4 5/16 – 1/2 9/16 – 3/4 Std. Pkg. Qty.
PAGE 43
Cable/Conduit Electrical Box Mounting Support Brackets Hangers/Hanging Systems Image 1 • Attach 4" or 4 11/16" electrical outlet boxes to studs • Support feature reduces box movement in wall • Manufactured from pre-galvanized steel • Comply with NEC Article 300.4 (D) (reference pages K.1 – K.2 for details) Beam/Purlin Stud Wall Stud Wall Stud Depth (In.) 2 1/2 and 3 1/2 2 1/2, 3 1/2, and 4 6 2 1/2, 3 1/2, and 4 Std. Pkg. Qty. 100 100 100 25 Dry Wall Part Number PH23 PH4 PH6 PMEB1 Image No.
PAGE 44
Cable/Conduit • Comply with NEC Article 358.30 to support conduit close to electrical box • Accommodate EMT and MC/AC cable • Allow conduit to align with box knockouts when used with PH series brackets (see page D.1) Fits EMT (In.) 1 1/2 – 3/4 1/2 – 3/4 Part Number PCS16 PCS812* PCS812D Electrical Box Depth 2 1/8 1 1/2 2 1/8 Color Black Black Silver Std. Pkg. Qty. 100 100 100 *Not UL or cUL listed.
PAGE 45
Cable/Conduit PMSF Description Box to stud support – non-adjustable. Box to stud support with screw, adjustable for 1/4" – 3/4" dry wall. Box to stud support flush to stud face – preset. Std. Pkg. Qty.
PAGE 46
Cable/Conduit • Secure electrical boxes to most metal studs • Preset versions offset for specific dry wall thickness • Include 1/4" hole to secure to stud with user-supplied screw • Hammer-on installation Part Number PMF250 PMF375 PMF500 PMF625 PMF750 Dry Wall Thickness (In.) 1/4 3/8 1/2 5/8 3/4 Std. Pkg. Qty.
PAGE 47
Cable/Conduit Image 1 Hangers/Hanging Systems • Designed to quickly install horizontal runs of conduit to metal studs • Available in push-fit (Image 1) or snap-close (Image 2) fittings • Suitable for both EMT and Rigid/IMC conduit Beam/Purlin Hammer-On Conduit to Metal Stud Brackets Stud Wall Fits Rigid/IMC (In.) — 1/2 3/4 3/8 1/2 – 3/4 1 Std. Pkg. Qty. 100 100 100 100 100 100 Acoustical Fits EMT (In.) 1/2 3/4 1 3/8 1/2 – 3/4 1 Dry Wall Part Number P8PF P12PF P16PF P6MF P812MF P16MF Image No.
PAGE 48
Cable/Conduit • Installs to stud with user-supplied screws • For use with metal or wood studs • Used independently or with assemblies for electrical box or conduit support Part Number P350 Description Screw-mounted box to stud support. Std. Pkg. Qty.
PAGE 49
Cable/Conduit Image 1 Stud Wall Image 2 Fits EMT (In.) 1/2 3/4 1 1/2 – 3/4 1 Fits Rigid/IMC (In.) — 1/2 3/4 1/2 – 3/4 1 Std. Pkg. Qty. 100 100 100 100 100 Dry Wall Image No.
PAGE 50
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Image 1 • Clip to electrical box to utilize dry wall on far side of box for support • Used with 1 1/2" or 2 1/8" deep electrical box • Prevent electrical box from recessing into wall cavity • No static load rating – for positioning only Image 2 Communication/ Low Voltage Stud Wall Far-Side Box Supports Part Number PJ1A25 PJ1A35 PJ1A4 PJ1A6 P766 P766PMD Image No. 1 1 1 Figure No. 1 1 1 Stud Depth (In.) 2 1/2 3 1/2 4 Std. Pkg. Qty.
PAGE 51
Cable/Conduit Beam/Purlin Adjustable Screw Gun Box Mounting Brackets 50 Communication/ Low Voltage PTSGB24 Description Mount box between studs spaced 11" – 18". Mount box between studs spaced 17" – 26". Std. Pkg. Qty.
PAGE 52
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage • Used to secure multiple electrical boxes in stud walls • Mount 1 1/2" or 2 1/8" deep electrical boxes • Suitable for 4" or 4 11/16" wide electrical boxes PRBS16 PRBS24 Part Number PRBS16 PRBS24 Description Rigid box mounting bracket for 16" stud spacing; capacity of three electrical boxes. Rigid box mounting bracket for 24" stud spacing; capacity of four electrical boxes. Std. Pkg. Qty.
PAGE 53
Cable/Conduit Beam/Purlin Stud-Mounted Box Support Brackets • User-supplied self-tapping screws attach box to bracket • Manufactured from pre-galvanized steel Hangers/Hanging Systems PSGB16A 50 Communication/ Low Voltage PSGB24A Description Mounts 2 1/2" deep electrical boxes to studs on 16" centers. Mounts 2 1/2" deep electrical boxes to studs on 24" centers. Stud Wall Part Number PSGB16A Std. Pkg. Qty.
PAGE 54
Cable/Conduit • Bracket to support electrical boxes from floor or channels • Break-away feature allows product to be used at three heights • Manufactured from pre-galvanized steel Part Number PFBS18 Description Box support bracket to mount electrical boxes at 12", 16", or 18" heights. Std. Pkg. Qty.
PAGE 55
Cable/Conduit Beam/Purlin Floor-Mounted Box Bracket Std. Pkg. Qty. 25 Communication/ Low Voltage Description Floor-mounted box bracket to mount center of electrical box 18" off floor.
PAGE 56
Cable/Conduit • Used to maintain appropriate cable spacing behind dry wall to comply with NEC Article 300.4 (D) (reference pages K.1 – K.2 for details) • Attaches to wood or metal stud with user-supplied screws • Accommodates a variety of cable types Part Number PCJ6 Cable Type Non-metallic Non-metallic MC/AC Description Cable support clip to provide 1 1/2" spacing for cables behind dry wall. Std. Pkg. Qty.
PAGE 57
Cable/Conduit Beam/Purlin Cable Support Clip for Single Cable Description Accommodates MC/AC cable (12-2 through 10-3). Std. Pkg. Qty. 100 Stud Wall Part Number PFXC20 Hangers/Hanging Systems • Used to maintain appropriate cable spacing behind dry wall to comply with NEC Article 300.4 (D) (reference pages K.1 – K.
PAGE 58
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage • Designed to secure horizontal runs of conduit through metal studs • Eliminate rattling conduit • Available with push-fit (Image 1) or snap-close (Image 2) conduit fittings Image 1 Image 2 Part Number PFB8P PFB12P PFB6M PFB812M Image No. 1 1 2 2 Fits EMT (In.) 1/2 3/4 3/8 1/2 – 3/4 Fits Rigid/IMC (In.) — 1/2 3/8 1/2 – 3/4 Std. Pkg. Qty.
PAGE 59
Cable/Conduit Beam/Purlin Metal Stud Grommets Hangers/Hanging Systems • Install in pre-punched hole in metal studs • Protect cable within the building structure • Utilize metal stud punch tool (see page D.18) to create suitable holes in specific locations MSG-1.3-C Stud Wall MSGV-1.3-C Dry Wall Description Metal stud grommet. Metal stud grommet, anti-vibration tabs for 1/2" – 1" pipe. Communication/ Low Voltage Part Number MSG-1.3-C MSGV-1.3-C Std. Pkg. Qty.
PAGE 60
Cable/Conduit • Installs in pre-punched hole in metal studs • Protects cable within the building structure • Utilizes metal stud punch tool (see page D.18) to create suitable holes in specific locations Part Number CSM-1.25-C Description Cable stud manager for 1 1/4" cable spacing. Std. Pkg. Qty.
PAGE 61
Cable/Conduit J-Pro™ Series Referenced Images Hangers/Hanging Systems • UL listed for use in plenum or air handling spaces (such as ceiling voids and underfloor areas) per NEC Article 300.22 (C) and (D) (reference pages K.3 – K.
PAGE 62
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index J-Pro™ JP75 Series • Bundle capacity: 3/4" • Cable capacity: Category 6A (5), Category 6A (SD) (8), Category 6 (8), Category 5e (10) Image Part Number No. Description JP75W-L20 1 Wall mount – one 1/4" mounting hole. JP75WP2B-L20 2 Wall mount for powder actuated fasteners – one 5/32" and one 1/4" mounting hole.
PAGE 63
Cable/Conduit Beam/Purlin J-Pro™ JP131 Series • Bundle capacity: 1 5/6" • Cable capacity: Category 6A (15), Category 6A (SD) (25), Category 6 (25), Category 5e (29) JP131DW-L20 JP131SBC50-L20 JP131SBC87RBL20 JP131HBC50RBL20 JP131HBC75RBL20 JP131CP-L20 JP131ZP-L20 JP131UF100-L20 50 50 50 50 50 50 50 50 50 Miscellaneous Sizing Information Codes & Standards Reference Reference JP131HBC25RBL20 50 Acoustical JP131SBC87-L20 50 Dry Wall JP131SBC50RBL20 50 Communication/ Low Voltage JP131CMB-
PAGE 64
Cable/Conduit Beam/Purlin • Bundle capacity: 2" • Cable capacity: Category 6A (30), Category 6A (SD) (46), Category 6 (46), Category 5e (55) Stud Wall JP2WP2B-L20 Communication/ Low Voltage Part Number JP2W-L20 JP2CMB-L20 Dry Wall Hangers/Hanging Systems J-Pro™ JP2 Series JP2SBC50RB-L20 JP2DW-L20 JP2SBC50-L20 Acoustical JP2SBC87-L20 JP2SBC87RB-L20 Index Codes & Standards Sizing Information Reference Reference Miscellaneous JP2HBC25RB-L20 JP2HBC50RB-L20 JP2HBC75RB-L20 JP2CP-L20 JP2ZP-L20
PAGE 65
Cable/Conduit • Bundle capacity: 4" • Cable capacity: Category 6A (115), Category 6A (SD) (180), Category 6 (180), Category 5e (200) JP4SBC50-X20 JP4SBC50RB-X20 JP4SBC87RB-X20 JP4HBC75RB-X20 JP4CP-X20 JP4ZP-X20 JP4UF100-X20 Miscellaneous Sizing Information Codes & Standards Reference Reference JP4HBC50RB-X20 Acoustical JP4HBC25RB-X20 Dry Wall JP4SBC87-X20 Communication/ Low Voltage JP4CMB-X20 Stud Wall JP4WP2B-X20 Hangers/Hanging Systems Part Number JP4W-X20 Std. Image Pkg. No.
PAGE 66
Cable/Conduit • Compatible with 3/4", 1 5/16", and 2" J-Pro™ products • Allows multiple hooks to be installed utilizing one attachment point • Includes 1/8", 1/4", and 3/8" mounting holes for various user-supplied hardware Part Number PCATHBA Description Multi-tier bracket for J-Pro™ product line. Std. Pkg. Qty.
PAGE 67
Cable/Conduit Hangers/Hanging Systems • UL listed for use in plenum or air handling spaces (such as ceiling voids and underfloor areas) per NEC Article 300.22 (C) and (D) (reference pages K.3 – K.
PAGE 68
Beam/Purlin Cable/Conduit Align snap lock Align chaining bracket attachment of J-hook under the assembly. with holes in chosen bracket and snap J-hook into place. Slide chaining bracket between J-hook and the metal bracket until it snaps. Pull down to fully engage. Attach J-hooks as Final assembly explained in first-level is a second-level installation above. installation consisting of one threaded rod bracket, one chaining bracket, and two J-hooks for clarity.
PAGE 69
Cable/Conduit Beam/Purlin J-Mod® Series • Bundle capacity: 2" • Cable capacity: Category 6A (30), Category 6A (SD) (46), Category 6 (46), Category 5e (55) Std. Pkg. Qty. 10 Communication/ Low Voltage 10 Stud Wall 10 Hangers/Hanging Systems 10 10 Acoustical 10 Dry Wall 10 10 10 10 10 Miscellaneous Sizing Information Codes & Standards Reference Reference Image Part Number No. Description JMJH2W-X20 1 J-hook for wall mount applications only; two 1/4" mounting holes for user supplied screws.
PAGE 70
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Image 1 • Soft, premium material is safe for use on high-performance communication cable • UL listed for use in plenum or air handling spaces (such as ceiling voids and underfloor areas) per NEC Article 300.22 (C) and (D) (reference pages K.3 – K.
PAGE 71
Cable/Conduit • Strong, low-profile, flexible material that is safe to use on high-performance cabling • Cost-effective for general bundling • Leaves no residue • HLTT products include an adhesive on the leading edge to facilitate installing hook and loop with one hand • Color: Black Hangers/Hanging Systems Image 1 Beam/Purlin Contractor Grade Hook and Loop Cable Ties Stud Wall Length 20.00" Width (In.) 0.75 TTS-35R3-0 1 35.00" 0.75 TTS-35RX0 1 35.00" 0.75 HLTT1.5S-Q20 HLTT1.5S-C20 2 2 7.
PAGE 72
E.12 Index Codes & Standards Sizing Information Reference Reference Miscellaneous Acoustical Dry Wall Communication/ Low Voltage Stud Wall Hangers/Hanging Systems Beam/Purlin Bridle Rings Referenced Images Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Order number of pieces required, in multiples of Standard Package Quantity.
PAGE 73
Cable/Conduit Beam/Purlin Bridle Rings 2 BR-1.25-1/4-20 2 BR-2.0-1/4-20 2 BR-4.0-1/4-20 2 BR-1.25-14WS 3 BR-2.0-14WS 3 BR-1.5-PAF 4 BR-2.0-PAF 4 BR-1.5-SN 5 BR-2.0-SN 5 BR-1.5-TW 6 BR-2.0-TW 6 100 100 100 100 100 100 100 100 100 100 100 100 Index BR-2.0-10-24 100 Miscellaneous Sizing Information Codes & Standards Reference Reference 2 Acoustical BR-1.25-10-24 100 Dry Wall 2 Communication/ Low Voltage BR-.75-10-24 Description 1/2" capacity – #8 wire.
PAGE 74
E.14 Index Codes & Standards Sizing Information Reference Reference Miscellaneous Acoustical Dry Wall Communication/ Low Voltage Stud Wall Hangers/Hanging Systems Beam/Purlin Notes Order number of pieces required, in multiples of Standard Package Quantity.
PAGE 75
Cable/Conduit Beam/Purlin Dry Wall Low-Voltage Mounting Brackets Hangers/Hanging Systems Image 1 • Choose design styles for new or retrofit installations • Available in both single and double gang configurations • Manufactured from galvanized steel materials Stud Wall Part Number LV-S-1G Std. Pkg. Qty. 25 25 100 50 Miscellaneous Sizing Information Codes & Standards Reference Reference LV-W-2G Image No. Description 1 Single gang, low-voltage mounting bracket for new installations.
PAGE 76
Cable/Conduit • Prevents electrical box from pulling away from dry wall • Supports box to dry wall to prevent mounting directly to stud • Allows quick installation with no tools required • Manufactured from pre-galvanized steel Part Number PDSI2A Description Secures electrical box to dry wall. Std. Pkg. Qty.
PAGE 77
Cable/Conduit Troffer Fastener Clip Communication/ Low Voltage Description T-bar clip for troffers. Stud Wall Part Number P515A Std. Pkg. Qty. 100 Hangers/Hanging Systems • Positive clip-on support for troffers/lay-in fixtures • Fits round or rectangular head T-bars • Complies with NEC Article 410.36 requirements (reference pages K.10 – K.11 for details) • For upturned or straight lip fixtures Beam/Purlin Acoustical Dry Wall Part Number PATA4I Description T-bar clip with 1/4-20 mounting hole.
PAGE 78
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Image 1 • For supporting conduit above acoustical T-bar • Top-mounted applications • Used in conjunction with T-bar clips mounted to electrical boxes to eliminate the need for offset bending conduit • Meet NEC Article 300.11 requirements (reference page K.2 for details) Image 2 Part Number P8PATA P12PATA P16PATA P6MATA P812MATA P16MATA Image No. 1 1 1 2 2 2 Fits EMT (In.
PAGE 79
Cable/Conduit Stud Wall Image 2 Fits EMT (In.) 1/2 3/4 1 3/8* 1/2 – 3/4 1 Fits Rigid/IMC (In.) — 1/2 3/4 3/8 1/2 – 3/4 1 Std. Pkg. Qty. 100 100 100 100 100 100 Acoustical *Or 14-2 through 12-3 MC/AC cable. Dry Wall Image No.
PAGE 80
Cable/Conduit • Provides a means to support fixtures from building structure instead of T-bar • Includes 5/8" stud and wing nut washer • Accommodates 1" T-bar • Manufactured from pre-galvanized materials Part Number PIDS Description T-bar drop wire clip for use with 1" T-bar. Static Load Rating (Lbs.) 65 Std. Pkg. Qty.
PAGE 81
Cable/Conduit Stud Wall P512A P512A 25 *UL and cUL listed. Dry Wall Description Box to T-bar fastener for flush or 3/4" offset mount. Box to T-bar fastener allows up to 8" of height adjustment. Std. Pkg. Qty.
PAGE 82
Beam/Purlin Cable/Conduit P512HDK • Box fastener adjustable for 16" – 24" ceiling joist/stud spacing • Allow versatility in installing electrical boxes along the length of the bar • Install quickly and easily between ceiling joists or wall studs P512HDT Part Number P512HDK P512HDT Description Installs in 1/2" knockouts in bottom of electrical box. Includes 3/4" stud to accommodate fixture stems. Std. Pkg. Qty.
PAGE 83
Cable/Conduit • Accommodates fixed 24" T-bar span • Allows for adjustable fixture position • Fits Lightolier 5 and Calculite* series fixtures *Lightolier and Calculite are trademarks of the Phillips group brand. Stud Wall Description T-bar assembly that fits Lightolier 5 and Calculite* series fixtures. Hangers/Hanging Systems Part Number P520 Std. Pkg. Qty.
PAGE 84
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall • Support electrical fixtures or boxes to 1" wide T-bar • Include 1" wing nut washer (see page H.3) • Multiple stud lengths provided • No tools required for installation PPT16 P4G162 Part Number PPT16 P4G162 Description T-bar scissor clip with 1/4-20 x 5/8" stud. T-bar scissor clip with 1/4-20 x 2" stud. Std. Pkg. Qty.
PAGE 85
Cable/Conduit Stud Wall PEC3114Z34 Description Independent drop wire clip. Independent drop wire clip with spring steel drop wire clip. Std. Pkg. Qty. 100 100 Communication/ Low Voltage Part Number PEC311 PEC3114Z34 Hangers/Hanging Systems PEC311 • Prevent sway of dedicated drop wire • Satisfy NEC Article 300.11 code requirements (reference page K.
PAGE 86
G.10 Index Codes & Standards Sizing Information Reference Reference Miscellaneous Acoustical Dry Wall Communication/ Low Voltage Stud Wall Hangers/Hanging Systems Beam/Purlin Notes Order number of pieces required, in multiples of Standard Package Quantity.
PAGE 87
Cable/Conduit Rod Hangers with Threaded Impressions Communication/ Low Voltage Description Accommodates 1/4-20 threaded rod. Accommodates 3/8-16 threaded rod. Std. Pkg. Qty. 100 100 Stud Wall Part Number P4TI P6TI Hangers/Hanging Systems • Prevent the need for additional nuts • Include 1/4" mounting hole in top for assemblies • Static load capacity: 160 lbs.
PAGE 88
Cable/Conduit • Friction fit prevents the need for additional hardware • Static load capacity: 160 lbs. Part Number P6A Description 3/8" non-threaded rod. Std. Pkg. Qty. 100 Offset Bracket • Utilized for assemblies or a variety of other applications • Prevents conduit bends to accommodate electrical boxes • Static load capacity: 160 lbs. Part Number PAO Description Offset bracket with two 1/4" non-threaded holes. Std. Pkg. Qty.
PAGE 89
Cable/Conduit Description Wing nut washer fits 1/4-20 stud. Stud Wall Part Number P4WN Std. Pkg. Qty.
PAGE 90
H.4 Index Codes & Standards Sizing Information Reference Reference Miscellaneous Acoustical Dry Wall Communication/ Low Voltage Stud Wall Hangers/Hanging Systems Beam/Purlin Notes Order number of pieces required, in multiples of Standard Package Quantity.
PAGE 91
Cable/Conduit Beam/Purlin Convenient Sizing Information Electrical Metallic Tubing (EMT) *Per UL table NAE.3. Nominal Outside Dia. (In.) 0.82 1.03 1.29 1.64 1.88 2.36 2.86 3.48 3.97 4.47 Min. Weight Per 100 Ft. w/ Couplings Attached (Lbs.) 60.00 82.00 116.00 150.00 182.00 242.00 401.00 493.00 573.00 638.00 Weight of Conduit and Conductors Per 100 Ft. (Lbs.) 82.10 122.80 182.30 267.30 341.80 503.80 775.00 1069.00 1346.00 1632.
PAGE 92
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Rigid Steel Conduit Trade Size (In.) 0.38 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.50 4.00 Nominal Inside Dia.* (In.) 0.49 0.63 0.84 1.06 1.39 1.62 2.08 2.49 3.09 3.57 4.05 Nominal Outside Dia. (In.) 0.68 0.84 1.05 1.32 1.66 1.90 2.38 2.88 3.50 4.00 4.50 Min. Weight Per 100 Ft. w/ Couplings Attached (Lbs.) 51.50 79.00 105.00 153.00 201.00 249.00 332.00 527.00 682.60 831.00 972.
PAGE 93
Cable/Conduit Nominal Outside Dia. (In.) 0.84 1.05 1.32 1.66 1.99 2.38 Min. Weight of Conduit Per 100 Ft. (Lbs.) 11.00 14.00 20.00 19.00 27.00 32.00 Weight of Conduit and Conductors Per 100 Ft. (Lbs.) 33.10 54.80 86.30 136.30 186.80 261.80 Stud Wall Nominal Inside Dia.* (In.) 0.56 0.76 1.00 1.40 1.55 2.03 Hangers/Hanging Systems Trade Nominal Size (In.) 0.50 0.75 1.00 1.25 1.50 2.00 Beam/Purlin Electrical Non-Metallic Tubing (ENT) *Per UL table NAE.3. Weight of Pipe Per Ft. (Lbs.) 0.04 0.07 0.
PAGE 94
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall AWG Size 14-2 Solid 14-3 Solid 14-4 Solid 12-2 Solid 12-3 Solid 12-4 Solid 10-2 Solid 10-3 Solid 10-4 Solid 8-2 Stranded 8-3 Stranded 8-4 Stranded 6-2 Stranded 6-3 Stranded 6-4 Stranded 4-2 Stranded 4-3 Stranded 4-4 Stranded 2-2 Stranded 2-3 Stranded 2-4 Stranded Insulated Ground Nominal Outside Dia. (In.) 0.45 0.48 0.51 0.50 0.53 0.57 0.56 0.60 0.65 0.71 0.77 0.84 0.80 0.87 0.95 0.95 1.04 1.14 1.08 1.18 1.
PAGE 95
THHN Index ACTMM 0.48 0.57 — — — 10 8 6 4 2 Miscellaneous Sizing Information Codes & Standards Reference Reference 0.48 0.96 0.84 0.70 0.60 — — Acoustical 12 — — — 0.60 0.50 0.49 Solid 0.45 Dry Wall Stranded — 1.01 0.89 0.74 0.64 — — Stranded — — — — 0.65 0.54 0.52 Solid 0.49 Communication/ Low Voltage Solid 0.43 1.12 0.97 0.81 0.70 — — Stranded — Stud Wall AWG Size of Circuit Conductors 14 — — — 0.71 0.59 0.55 Solid 0.52 1.23 1.07 0.88 0.
PAGE 96
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous AWG Size No. of Strands Ground Wire Size Approximate Outside Dia. (In.) Approximate Weight Per 100 Ft. (Lbs.) Without Ground Wire 14-2 Solid 12-2 Solid 10-2 Solid 14-3 Solid 12-3 Solid 10-3 Solid 8-3 7 6-3 7 — — — — — — — — 0.17 x 0.37 0.19 x 0.40 0.22 x 0.45 0.30 0.33 0.40 0.54 0.61 5.30 7.00 10.10 8.20 10.90 15.70 27.80 42.
PAGE 97
Cable/Conduit Stud Wall Communication/ Low Voltage Approximate Weight Per 100 Ft. (Lbs.) 1.70 2.50 4.00 6.50 9.70 15.50 19.10 23.60 30.40 37.50 Hangers/Hanging Systems Size (AWG) 14 12 10 8 6 4 3 2 1 1/0 Armor Outside Dia. (In.) 0.11 0.13 0.16 0.22 0.25 0.32 0.35 0.38 0.45 0.
PAGE 98
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Cable Type Category 6A Category 6A (SD) Category 6 Category 5e Diameter (In.) 0.300 0.240 0.240 0.225 J-Pro™ Capacity J-Pro™ Family JP75 JP131 JP2 JP4 Category 6A (0.300") 5 15 30 115 Category 6A (SD) (0.240") 8 25 46 180 Category 6 (0.240") 8 25 46 180 Category 5e (0.225") 10 29 55 200 Note: The above cable diameters represent the nominal Panduit cable diameter per performance level.
PAGE 99
Cable/Conduit NFPA 70; National Electric Code; 2011 Revision Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Sizing Information Codes & Standards Reference Reference Index 300.4 Protection Against Physical Damage. (B) Nonmetallic-Sheathed Cables and Electrical Nonmetallic Tubing through Metal Framing Members. (1) Nonmetallic-Sheathed Cable.
PAGE 100
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index NFPA 70; National Electric Code; 2011 Revision (continued) against nail or screw penetration shall be permitted. 300.11 Securing and Supporting. (A) Secured in Place. Raceways, cable assemblies, boxes, cabinets, and fittings shall be securely fastened in place.
PAGE 101
Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Sizing Information Codes & Standards Reference Reference Index type shall be installed in any duct, or shaft containing only such ducts, used for vapor removal or for ventilation of commercial-type cooking equipment. (B) Ducts Specifically Fabricated for Environmental Air.
PAGE 102
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index NFPA 70; National Electric Code; 2011 Revision (continued) with metal covers. 2) Cable Tray Systems. The provisions in (a) or (b) shall apply to the use of metallic cable tray systems in other spaces used for environmental air (plenums), where accessible, as follows: (a) Metal Cable Tray Systems.
PAGE 103
Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Sizing Information Codes & Standards Reference Reference Index 314.23 Supports. Enclosures within the scope of this article shall be supported in accordance with one or more of the provisions in 314.23 (A) through (H). (C) Mounting in Finished Surfaces. An enclosure mounted in a finished surface shall be rigidly secured thereto by clamps, anchors, or fittings identified for the application.
PAGE 104
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index NFPA 70; National Electric Code; 2011 Revision (continued) conduit body is not larger than the largest trade size of the conduit or tubing: (1) Intermediate metal conduit, Type IMC (2) Rigid metal conduit, Type RMC (3) Rigid polyvinyl chloride conduit, Type PVC (4) Reinforced thermosetting resin conduit, Type RTRC (5) Electri
PAGE 105
Acoustical Miscellaneous Sizing Information Codes & Standards Reference Reference Index 330.30 Securing and Supporting. (A) General. Type MC cable shall be supported and secured by staples, cable ties, straps, hangers, or similar fittings or other approved means designed and installed so as not to damage the cable. (B) Securing. Unless otherwise provided, cables shall be secured Dry Wall 330.2 Definition. Metal Clad Cable, Type MC.
PAGE 106
Cable/Conduit Beam/Purlin Hangers/Hanging Systems at intervals not exceeding 1.8m (6 ft.). Cables containing four or fewer conductors sized no larger than 10 AWG shall be secured within 300mm (12 in.) of every box, cabinet, fitting, or other cable termination. (C) Supporting. Unless otherwise provided, cables shall be supported at intervals not exceeding 1.8m (6 ft.).
PAGE 107
Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Sizing Information Codes & Standards Reference Reference Index 358.30 Securing and Supporting. EMT shall be installed as a complete system in accordance with 300.18 and shall be Stud Wall 348.30 Securing and Supporting. FMC shall be securely fastened in place and supported in accordance with 348.30 (A) and (B). (A) Securely Fastened. FMC shall be securely fastened in place by an approved means within 300mm (12 in.
PAGE 108
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index NFPA 70; National Electric Code; 2011 Revision (continued) securely fastened in place and supported in accordance with 358.30 (A) and (B). (A) Securely Fastened. EMT shall be securely fastened in place at least every 3m (10 ft.).
PAGE 109
Cable/Conduit Beam/Purlin NFPA 70; National Electric Code; 2011 Revision (continued) Hangers/Hanging Systems (A)(2) shall be permitted to support luminaires. (B) Suspended Ceilings. Framing members of suspended ceiling systems used to support luminaires shall be securely fastened to each other and shall be securely attached to the building structure at appropriate intervals. Luminaires shall be securely fastened to the ceiling framing member by mechanical means such as bolts, screws, or rivets.
PAGE 110
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall shall be supported by straps, staples, cable ties, hangers, or similar fittings designed and installed so as not to damage the cable. The installation shall also comply with 300.4 (D). 800.24 Mechanical Execution of Work. Communications circuits and equipment shall be installed in a neat and workmanlike manner.
PAGE 111
Cable/Conduit Beam/Purlin Telecommunications Pathways and Spaces; ANSI/TIA-569-C; Revision May, 2012 Hangers/Hanging Systems 6.7.6 Low-Voltage Mounting Bracket A low-voltage mounting bracket is similar to a plaster ring and may be used in place of an outlet box where permitted by code. 9.3.2 Telecommunications Pathway Separation From Lighting Balanced twisted-pair cabling should be separated from fluorescent lamps and associated fixtures by a minimum of 125mm (5 in.). Stud Wall 9.4.2.
PAGE 112
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index BICSI TDMM, 12th Edition; 2009 Revision Page 5-1: Introduction Horizontal pathways include: • Continuous pathways (e.g., conduit cable tray and cable matting) used for containment of telecommunications cabling • Non-continuous pathways (e.g.
PAGE 113
Cable/Conduit Beam/Purlin BICSI TDMM, 12th Edition; 2009 Revision (continued) Hangers/Hanging Systems Cable support devices that have narrow surface areas to support the cable laying horizontally inside or on top may have a detrimental effect on the transmissions performance of higher performance cabling systems. If possible, a wider surface area should be chosen to support the cable as a precaution against potential problems.
PAGE 114
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index J-ProTM Cable Support System – Frequently Asked Questions Question: What references define how and where J-hooks are used? Answer: J-hooks are a horizontal pathway promoted in the BICSI® TDM manual as a means to route cable bundles (see catalog pages K.14 – K.15).
PAGE 115
Cable/Conduit Beam/Purlin J-ProTM Cable Support System – Frequently Asked Questions (continued) Hangers/Hanging Systems Support System can be utilized in the area above the suspended ceiling (300.22 [C]) or below a raised floor (300.22 [D]), but it cannot be utilized within ductwork (300.22 [A] and [B]) (see catalog pages K.2 – K.4).
PAGE 116
Hangers/Hanging Systems Cable/Conduit Beam/Purlin UL File E136577 Volume 2, Section 2 Page 1 ULC File R21673 Volume 1 Index Codes & Standards Sizing Information Reference Reference Miscellaneous Acoustical Dry Wall Communication/ Low Voltage Stud Wall Description Product Covered: USL, CNL – Positioning Devices – Model JP2, JP4, JP75, JP131 General Description: USL, CNL – Indicates that the products have been evaluated in accordance with the requirements in UL 1565 and CAN/CSA C22.2 No. 18.
PAGE 117
Cable/Conduit Table 4 J-ProTM Cable Support System Description J-ProTM J-hook Beam/Purlin Family of Part Numbers JP75 Hangers/Hanging Systems Ratings: These devices are rated 60°C, for indoor use, suitable for use in air handling spaces in accordance with Sec. 300.22 (C) and (D) of the National Electrical Code in single units or pairs, and 15 lb. maximum load rating.
PAGE 118
Cable/Conduit Beam/Purlin On April 1, 2004, fire tests were conducted at our ULC Toronto facilities in accordance with the Standard CAN/ULC-S102.2-03, Standard Method of Test for Surface Burning Characteristics of Floor Covering, and Miscellaneous Materials and Assemblies. LISTED Plastic Materials 15KH Stud Wall Hangers/Hanging Systems Standard Method of Test for Surface Burning Characteristics of Floor Coverings, and Miscellaneous Material and Assemblies, CAN/ULC-S102.2-M88.
PAGE 119
Cable/Conduit Part Number Page Number Index M MSG-1.3-C ........................ D.17 MSGV-1.3-C ...................... D.17 Miscellaneous Sizing Information Codes & Standards Reference Reference F.1 F.1 F.1 F.1 Acoustical L LV-S-1G ................................ LV-S-2G ................................ LV-W-1G ............................... LV-W-2G ............................... Dry Wall J JMCB-X ................................ E.9 JMCMB25-1-X ..................... E.9 JMCMB25-3-X ..........
PAGE 120
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index Part Number Page Number MSPT-1.3 ........................... D.18 P P122 .................................... B.8 P123 .................................... B.8 P1224TI ............................. B.11 P1226T .............................. B.11 P1226TI ............................. B.11 P1236M ............................
PAGE 121
Cable/Conduit Page Number Page Number Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Sizing Information Codes & Standards Reference Reference Index PBC16P ............................... B.4 PBC16PSM ......................... B.4 PBC20M .............................. B.4 PBC20MSM ......................... B.4 PBC24M .............................. B.4 PBC24MSM ......................... B.4 PBC32M .............................. B.4 PBC32MSM ......................... B.4 PBC200 ....
PAGE 122
Cable/Conduit Beam/Purlin Hangers/Hanging Systems Stud Wall Communication/ Low Voltage Dry Wall Acoustical Miscellaneous Codes & Standards Sizing Information Reference Reference Index Part Number Page Number PM24 ................................... B.3 PM24S ................................. B.3 PM58 ................................... B.3 PM58S ................................. B.3 PM912 ................................. B.3 PM912S ............................... B.3 PMCS50 ............................
PAGE 123
Contractor Solutions for Electrical and Networking Installations Panduit is committed to providing our contractor partners a comprehensive portfolio of products, programs, and services to help increase job site productivity, improve back-office operations, and accelerate cash flow. Our collaborative approach addresses Panduit is a global leader in cabling and communication products, delivering end-to-end solutions in support of demanding electrical and networking requirements.
PAGE 124
Tinley Park, Illinois 60487 For more information Visit us at www.panduit.com Contact Customer Service by email: cs@panduit.com or by phone: 800-777-3300 (1P)WACB24--SA-ENG © 2014 Panduit Corp. ALL RIGHTS RESERVED Printed in the U.S.A.