Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

V00029BZ

Page 93 of 124

Attaching H Channel to Clear Panels [For End of Row Adjustable

Vertical Wall, 38"- 66" (C2HACERI3866) Only]

• Attach the inside H Channel to the outside H Channel with M5x12mm button head torx screws and M5 hex

nuts securing (2) clear panel in between the inside and outside H Channels. The number of screws and nuts

depends on the height of the wall.

• NOTE: When placing the clear panels, make sure that they are under the slots in the top of the H Channel.

NOTE: Make Sure

that Clear Panels

Below the Slots in

the H Channel.

Inside

H Channel

Outside

H Channel

M5x12mm But-

ton Head Torx

Screws

M5 Hex Nuts

(2) Clear

Panels

NOTE: Clear

Panels Should

be Below the

Slots in the H

Channel.

NOTE: Cut a Notch in

the Corners of the Clear

Panels for the Nuts that

will Attach H Channel to

Center Frame.