Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

V00029BZ

Page 92 of 124

Measure and Cut Wall Panel

• Measure distance between top and bottom studs in frame. (Shown as distance "Y")

• Measure distance between left and right studs in frame. (Shown as distance "X")

• Cut wall panel to match lengths "X" and "Y" using a sharp knife and a straight edge.

• Note: For End of Row Adjustable Vertical Wall, 38"- 66" (C2HACERI3866) the combined width of wall

panels and H Channel should total length "X". When trimming length "X", trim the sides equally to keep the

H Channel centered.

"Y"

"X"

Cut Wall Panels to

Match Lengths "X"

and "Y" Using a

Sharp Knife and a

Straight Edge.

H Channel Only Used with End of Row

Adjustable Vertical Wall, 38"- 66"

(Part # C2HACERI3866)

NOTE: When Using H

Channel, Trim Equal

Amounts from Both

Clear Panels to Keep H

Channel Centered.