Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

V00029BZ

Page 91 of 124

Mark and Cut H Channel [For End of Row Adjustable Vertical Wall,

38"- 66" (C2HACERI3866) Only]

• Make a mark on the inside and outside H Channels above the threaded studs on the lower center frame and

below the edge of the lower center frame.

• Detach H Channel assembly from top center frame.

• Separate the inside H Channel from the outside H Channel.

Cut H Channel

Sections Along

Mark from Step 1

Outside

H Channel

Edge of

Lower

Center

Frame

Threaded

Studs on Lower

Center Frame

H Channel

Step 1

Step 2

Inside

H Channel

Mark the H Channel

Above Studs on Lower

Center Frame and

Below the Edge of the

Lower Center Frame.