Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00029BZ
Page 57 of 124
Attaching Wall Beam Assembly to End of Row Frames
(A Minimum of 2 People are Required for this Step.)
• Lift (1) wall beam assembly above the end of row frames.
• Lower the wall beam assembly onto the hanger bracket.
• Secure wall beam assembly in to each hanger bracket with a total of (6) M6 hex nuts.
• If required fasten wall beam assembly to mid-span support post with (2) M6 hex nuts.
Wall Beam
Assembly
(6) M6 hex nuts
Hanger Bracket
Mid-Span
Support Post
Wall Beam
Assembly
(2) M6 hex nuts