Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

V00029BZ

Page 56 of 124

Attaching Support Post to Floor

• From the floor, remove a tile that is directly next to the tile that you will be attaching the support post to.

• Have (1) person hold the support post in place aligning the holes in the foot with the pilot holes in the tile.

• Have another person insert (4) M6x50 hex head bolts through the foot of the support post.

• From underneath the tile slide (2) tile plates over the (4) M6x50 hex head bolts and secure into place with (6)

M6 nuts.

• Repeat process for every support post required.

(4) M6x50 Hex

Head Bolts

(4) M6 Nuts

(2) Tile Plate

Toward Center of Aisle