Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00029BZ
Page 51 of 124
Attaching Wall Beam Connector
• Place the wall beam connector in between (2) wall beams so that the (8) studs pass through the wall beam
connector.
• Fasten the wall beam connector to the (2) wall beams with (8) M6x12mm bolts.
• Secure the wall beam connector in place with (8) M6 hex nuts.
Wall Beam
Connector
(8) M6 Hex Nuts
(8) M6x12mm
Bolts
Wall Beams
VIEW SHOWS BACK
OF WALL BEAMS
Wall Beam
Connector
PORTIONS OF WALL BEAMS HAVE
BEEN CUT AWAY TO ENHANCE VIEW