Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00029BZ
Page 122 of 124
Adhesive
Bottom
Adhesive
Cover
Placing Lower Guide (For Above Cabinet Blanking Panel Only)
• Trim lower guide to the width of the cabinet.
• Remove cover off of adhesive strip on the bottom of the lower guide.
• Adhere lower guide to the top of the cabinet in alignment with the gap in the wall beam that the blanking
panel will extend into.
Align Wall Lower Guide
with the Gap in the Wall
Beam that the Blanking
Panel will Fit into.