Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

V00029BZ

Page 112 of 124

Adjusting Door Damper

1. Slightly open door

2. Adjust Hook and Bracket so the Damper Ball can barely pass beneath the Hook and tighten screws.

3. Open the RH Door and allow it to close. Check for proper damper operation.

4. Open the LH Door and allow it to close. Check for proper damper operation.

5. Open both doors simultaneously and allow both to close together. Check for proper damper operation.

6. If required, re-adjust hook position.

LH Door

RH Door

Step

Hook

Damper Ball

Note: Having too much space between

left side damper arm and right side

damper hook damper may cause right

side damper arm to lift up before door

closes causing the door to not close

completely.