Installation instructions

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
V00029BZ
Page 100 of 124
Flap Seal Installation
• Attach a strip of Flap Seal to inner flange of each Vertical Panel so that the bottom is just above the notch on
the panel.
• Note: For the 900mm aisle, the flap seal needs to be installed after the vertical panels are put up.
Place This Seal
Just Above
"Notch" on the
Panel
Top View of Left Hand Vertical Panel
900mm/1200mm Aisle
"Notch" on
Vertical
Panel
Top View of Right Hand Vertical Panel
900mm/1200mm Aisle
Top View of Left Hand Vertical Panel
1800mm Aisle
Top View of Right Hand Vertical Panel
1800mm Aisle