Installation instructions

INSTRUCTIONS CM598G
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 22 of 28
Caster Kit Installation (NCSTR4)
• Install [4] Caster Mounting Plates into posts of cabinet (insert bracket into post in an angled position from
above mounting location, rotate bracket, and align bracket with mounting holes)
• Install [2] M5 screws into bottom holes of Caster Mounting Plate through cabinet post (as shown below)
• Secure [4] Caster Assemblies to Caster Mounting Plates
NOTE: Ensure that fixed casters and swivel casters are paired together at front and rear of cabinet
[2] M5 Hex Head Screw
(use 7mm socket wrench)
Caster Mounting Plate
Swivel Caster Assembly
(at rear of cabinet)
Swivel Caster Assembly
(at rear of cabinet)
Fixed Caster Assembly
(at front of cabinet)
Fixed Caster Assembly
(at front of cabinet)
[4] M8 Hex Head Screw
(use 13mm socket wrench)
Caster
Mounting
Plate
Caster
Mounting
Plate