Submittal

MIM094 / MIM125 / MIM187 OPERATION MANUAL
PA25213A01_01 Page: 9 of 13 8-2007
SECTION 5: TO STAMP MMP SERIES MARKER PLATES AND MT SERIES TAGS
NOTE: Stamping marker plates and tags under ½” wide is not recommended.
NOTE: For first time use of the press, see
“Adjustments for Stamping” section
before proceeding further.
SECTION 6: TO STAMP PAN-STEEL EH & SH STAINLESS STEEL CABLE TIES AND
MS SERIES STRAPPING
NOTE: Stamping stainless steel cable ties and strapping under ½” wide is not recommended.
NOTE: For first time use of the press, see
“Adjustments for Stamping” section
before proceeding further.