Cut Sheet

18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMH12
31MAY2019
0
Technical Data Sheet
Page 1 of 2  2019 PANDUIT Corp
TDS: GMH12
Panduit GMH12 Film Lamination
This specification is intended to outline the physical and chemical properties of PANDUIT’s GMH12 material and include the
following printable material identifiers:
Printable Material Suffixes
Y6T
Y6C
PRODUCT SPECIFICATIONS:
Description:
Material is RoHS compliant (European Union directive
2002/95/EC). GMH12 consists of a top coated 5.0 mil polyester
film laminated to a 4.0 mil polyolefin film. This material is
halogen free.
Print Methods: This material is recommended for thermal transfer printing.
Standard Colors: Yellow
Thickness: 9.5 +/- 0.5 mils
Service Temperature Range: -40°F to 180°F (-40°C to 82°C)
Minimum Application Temperature: -10°F (-23°C)
Storage Conditions: Store at 70°F (21°C) and 50% Relative Humidity.
For cassette products do not exceed 95°F.
PROPERTIES: PERFORMANCE:
Tensile Strength: MD: 110 +/- 11.0 lbs./inch width (PSTC-131)
TD: 150 +/- 15.0 lbs./inch width (PSTC-131)
Elongation:
MD: 300% +/- 10% (PSTC-131)
TD: 220% +/- 10% (PSTC-131)
UV Resistance: *3000 hours no visual change observed (ASTM G154).
Tear-Propagation Resistance: MD: 230 gms (8.1 oz) (ASTM D1938)
TD: 295 gms (10.4 oz) (ASTM D1938)
Humidity Resistance: 30 days at 100
0
F(37
0
C) and 95% R.H, no visible change observed
Abrasion Resistance: CS-10 wheels/250 gm wt/50 cycles, no visible change observed
Long Term High Service Temp:
30 days at 180°F (82°C), no visible change observed.
Significant browning of the material observed when exposed for
4 hours at 250
0
C (482
0
F)
Long Term Low Service Temp:
30 days at -40°F (-40°C), no visible change observed.
Air Handling Spaces: Meets the outgassing requirements of ASTM E-595 suitable for
use in air handling spaces.
*3000 hours equates to 5 years of assimilated outdoor UV exposure.