Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

RW195

Page 1 of 2

TYPE LDPH RACEWAY

FOR USE WITH PANDUIT TYPE LDPH

SURFACE RACEWAY ROUTING SYSTEM

Part Number(s): LDPH3, LDPH5 & LDPH10

FILL CAPACITY TABLE

PARTS LIST:

1. LDPH3 - RACEWAY

2. LDPH5 - RACEWAY

3. LDPH10 - RACEWAY

A. ECFX - END CAP FITTING

B. RFX103 - REDUCER FITTING

C. TFX - TEE FITTING

D. RFX105 - REDUCER FITTING

E. SINGLE GANG BOX

F. SINGLE GANG FACEPLATE

G. OCFX - OUTSIDE CORNER FITTING

H. CFX - COUPLER FITTING

J. RAEFX - ENTRANCE END FITTING

K. ICFX - INSIDE CORNER FITTING

L. DOUBLE GANG BOX

M. DOUBLE GANG FACEPLATE

N. RAFX - RIGHT ANGLE FITTING

O. DCEFX - DROP CEILING ENTRANCE

END FITTING

LDPH10

LDPH5

LDPH3

Printed in U.S.A.

PAGE 1
TYPE LDPH RACEWAY FOR USE WITH PANDUIT TYPE LDPH SURFACE RACEWAY ROUTING SYSTEM Part Number(s): LDPH3, LDPH5 & LDPH10 INSTALLATION INSTRUCTIONS © Panduit Corp. 2013 RW195 Printed in U.S.A. PARTS LIST: 1. LDPH3 - RACEWAY 2. LDPH5 - RACEWAY 3. LDPH10 - RACEWAY A. ECFX - END CAP FITTING B. RFX103 - REDUCER FITTING C. TFX - TEE FITTING D. RFX105 - REDUCER FITTING E. SINGLE GANG BOX F. SINGLE GANG FACEPLATE G. OCFX - OUTSIDE CORNER FITTING H. CFX - COUPLER FITTING J. RAEFX - ENTRANCE END FITTING K.
PAGE 2
INSTALLATION INSTRUCTIONS © Panduit Corp. 2013 RW195 1 TO OPEN COVER 2 THE MOUNTING HARDWARE USED TO SECURE THE RACEWAY SHALL BE APPROPRIATE FOR THE MOUNTING SURFACE. TO REMOVE COVER 3 E-mail: techsupport@panduit.com For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 2 of 2 Fax: 866-405-6654 Rev.