Cut Sheet

C
B
D
A
G RAD
BOLT SIZE
E
F
F
E
C
B
D
A
W
G RAD
BOLT SIZE
* HEX SIZE MAY DIFFER FROM CHART. DIFFERENCE IN SIZE WILL NOT AFFECT FIT, FORM, OR FUNCTION OF PART
FIGURE 2
FIGURE 1
NOTES:
1. MATERIAL:
BODY - ALUMINUM, TIN PLATED
SCREW - ALUMINUM, TIN PLATED
2. UL LISTED, CSA CERTIFIED, OR cULus FOR USE UP TO
600V & TEMPERATURE RATED 90
C (AL9CU)
3. DUAL RATED FOR USE WITH COPPER OR ALUMINUM
STRANDED CODE CONDUCTOR
4. THESE PARTS ARE RoHS COMPLIANT
5. USE OF OXIDE INHIBITING JOINT COMPOUND LIKE
PANDUIT CMP-100 RECOMMENDED FOR PAD TO PAD
AND CONDUCTOR SURFACES
6. SEE PACKAGING LABEL FOR TIGHTENING TORQUE
INFORMATION
7. PKG QTY:
6 = 6
OR
PART
NUMBER
FIGURE
WIRE RANGE
COPPER/ALUMINUM
WIRE STRIP
LENGTH - IN [mm]
STUD SIZE
IN
DIMENSIONS - IN [mm]
HEX KEY* AGENCY
A
.02 [.5] B .05 [1.3] C .03 [.8] D .03 [.8] E .04 [1] F .03 [.8] G .02 [.5] W .05 [1.3]
LAM2A1/0-14-6Y 1 14 AWG - 1/0 AWG .62 [15.7] 1/4 0.43 [10.8] 1.48 [37.5] 0.63 [15.9] 0.19 [4.7] 1.13 [28.7] 0.77 [19.5] 0.42 [10.7] N/A SLOTTED cULus
LAM2A2/0-14-6Y 1 14 AWG - 2/0 AWG .62 [15.7] 1/4 0.43 [10.8] 1.46 [37.2] .63 [15.9] 0.19 [4.7] 1.25 [31.8] 0.77 [19.5] 0.42 [10.7] N/A 3/16 cULus
LAM2A250-38-6Y 2 6 AWG - 250 kcmil 1.00 [25.4] 3/8 0.51 [13.0] 2.58 [65.5] 1.01 [25.6] 0.26 [6.5] 1.64 [41.6] 1.19 [30.3] 1.05 [26.7] 1.50 [38.0] 5/16 cULus
LAM2A350-12-6Y 2 6 AWG - 350 kcmil 1.13 [28.6] 1/2 0.88 [22.2] 2.88 [73.2] 1.13 [28.7] 0.28 [7] 1.91 [48.4] 1.25 [31.8] 0.86 [21.8] 1.73 [44.0] 5/16 cULus
LAM2A600-12-6Y 2 2 AWG - 600 kcmil 1.38 [34.9] 1/2 0.63 [16.0] 3.19 [81.0] 1.38 [34.9] 0.44 [11.2] 2.38 [60.5] 1.56 [39.6] 1.19 [30.2] 2.00 [50.8] 3/8 UL & CSA
LAM2A1000-58-6Y 1 500 kcmil - 1000 kcmil 1.63 [41.4] 5/8 0.88 [22.2] 3.50 [88.9] 1.63 [41.4] 0.50 [12.7] 3.50 [88.9] 1.94 [49.3] 1.00 [25.4] N/A 3/8 UL & CSA
SEE NOTES
LAM2A SERIES
ALUMINUM MECHANICAL LUGS
CUSTOMER DRAWING
REV
DATE
BY
CHK
DESCRIPTION
ECN
DRAWN BY
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
DATE CHK
TITLE
SCALE SIZE
B
UNLESS OTHERWISE SPECIFIED,
DIMENSIONAL TOLERANCES ARE: IN [mm]
THIRD ANGLE
PROJECTION
ITEM REVISION NAME
DATASET FILE NAME
.X .XXX
.XX ANGLES
SHEET 1 0F 1
DRAWING NUMBER
MATERIAL
10N006AT-NC/10.SLDDRW
10N006AT/10
JHNU 2/06 JHNU
NONE
10N006AT-NC
APR
09 1/2020 JHNU RGB RGB
057109
REVISED B DIM FOR LAM2A1/0-14-6Y: 1.48 [37.5] WAS 1.47 [37.3]
REVISED C DIM FOR LAM2A1/0-14-6Y: .63 [15.9] WAS .62 [15.7]
REVISED D DIM FOR LAM2A1/0-14-6Y: .19 [4.7] WAS .19 [4.8]
REVISED E DIM FOR LAM2A1/0-14-6Y: 1.13 [28.7] WAS 1.13 [28.7]
REVISED F DIM FOR LAM2A1/0-14-6Y: .77 [19.5] WAS .78 [19.9]
REVISED B DIM FOR LAM2A2/0-14-6Y: 1.46 [37.2] WAS 1.47 [37.3]
REVISED C DIM FOR LAM2A2/0-14-6Y: .63 [15.9] WAS .62 [15.7]
REVISED D DIM FOR LAM2A2/0-14-6Y: .19 [4.7] WAS .19 [4.8]
REVISED E DIM FOR LAM2A2/0-14-6Y: 1.25 [31.8] WAS 1.20 [30.6]
REVISED F DIM FOR LAM2A2/0-14-6Y: .77 [19.5] WAS .78 [19.9]
REVISED B DIM FOR LAM2A250-38-6Y: 2.58 [65.5] WAS 2.56 [65.1]
REVISED C DIM FOR LAM2A250-38-6Y: 1.01 [25.6] WAS 1.00 [25.4]
REVISED D DIM FOR LAM2A250-38-6Y: .26 [6.5] WAS .25 [6.4]
REVISED E DIM FOR LAM2A250-38-6Y: 1.64 [41.6] WAS 1.64 [41.7]
REVISED F DIM FOR LAM2A250-38-6Y: 1.19 [30.3] WAS 1.19 [30.2]