Cut Sheet
P.2
Network Infrastructure Solutions
P.
Cable
Management
Accessories
A.
Featured
Products
B.
Copper
Systems
C.
Fiber
Systems
H.
Zone
Cabling
J.
Cable
Routing
Systems
K.
Surface
Raceway
L.
Cabinets
& Rack
Systems
M.
Power
Management
N.
Grounding
& Bonding
O.
Identification
Products
Q.
Part
Number
Index
D.
Faceplates,
Frames &
Surface
Mount Boxes
E.
Industrial
Networks
F.
Audio
Video
Systems
G.
Keystone
Cabling
Systems
X-out for #10 screw
(Recommend truss head)
Tak-Ty
®
Hook & Loop Cable Ties
HLT (Loop Ties) HLS (Strip Ties) HLB (Stacked Strips)
● Soft, premium material is safe to use on high performance
network cables protecting against over-tensioning
● Broad selection of durable designs and sizes
● Adjustable, releasable, and re-usable hundreds of times –
ideal for applications requiring frequent moves, adds,
or changes
● Easy to use and operator safe with no sharp edges
● A full range of colors
● Operating temperature range: 0°F to 220°F
(-18°C to 104°C)
● Complementary mounts available
HLM/HLS (Rolls)
Part Number
Length Width
Max.
Bundle Dia.
Min. Loop
Tensile Strength*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm In. mm Lbs. N
Loop Ties – Slot allows for pre-wrapping of bundles
HLT2I-X0 8.00 203.0
0.50 12.7
1.91 49.0
40 178
10 100
HLT3I-X0 12.00 305.0 3.18 81.0
HLT2I-M0 8.00 203.0 1.91 49.0
1 1
HLT3I-M0 12.00 305.0 3.18 81.0
Strip Ties – Perforated in convenient 6", 12", and 18" strips
HLS1.5S-X0 6.00 152.0
0.75 19.1
1.50 38.0
50 222 10 100
HLS3S-X0 12.00 305.0 3.20 81.0
HLS5S-X0 18.00 457.0 5.00 127.0
Stacked Strip Ties – Eliminates cutting ties to length and staging them for each job
Rounded edges for installer safety – 100 pieces
HLB2S-C0 7.00 178.0 0.75 19.1 1.60 41.0 50 222 1 10
Part Number
Length Width
Max.
Bundle Dia.
Min. Loop
Tensile Strength*
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.Ft. m In. mm In. mm Lbs. N
15' and 75' Continuous Rolls – Can be cut to desired length, eliminating waste
HLM-15R0
15.0 4.6
0.33 8.4
Various Various
18 80
1 10
HLS-15R0
0.75 19.1 50 222
HLS-75R0 75.0 22.9
For color options, reference hook and loop cable ties chart, see page P.5.
*Note: Minimum 2" overlap required to achieve loop tensile rating.