Technical Bulletin

Tak-Ty
®
Hook & Loop Cable Ties
O r d e r i n g I n f o r m a t i o n
• Soft, premium material is safe to use on high-performance cabling
• Adjustable, releasable, and reusable up to hundreds of times
• Broad selection of durable designs and sizes
• Select ties are UL listed for use in plenum or air handling spaces
(such as ceiling voids and under fl oor areas) per NEC, Section
300-22 (C) and (D); fl ammability rating: UL 94V-2
• A full range of colors; see Color Chart on page 4
Rack application X-Out for #10
Truss Head Screw
Loop Tie: HLT2I-X0
Available in eight colors
Part Number
Length Width
Max.
Bundle Dia.
Min. Loop
Tensile Str.‡
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
In. mm In. mm In. mm Lbs. N
Loop Ties – Slot allows for pre-wrapping of bundles; X-Out allows for use with #10 truss head screw
HLT2I-X0^* 8.00 203.0 0.50 12.7 1.91 49.0 40 178 10 100
HLT3I-X0^* 12.00 305.0 0.50 12.7 3.18 81.0 40 178 10 100
UL Listed Loop Ties (Maroon) for plenum applications
HLTP2I-X12
8.00 203.0 0.50 12.7 1.91 49.0 40 178 10 100
HLTP3I-X12
12.00 305.0 0.50 12.7 3.18 81.0 40 178 10 100
UL Listed Strip Ties (Maroon) for plenum applications
HLSP1.5S-X12
6.00 152.0 0.75 19.1 1.50 38.0 50 222 10 100
HLSP3S-X12
12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100
HLSP5S-X12
18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100
UL Listed Loop Ties (Black) for plenum applications
HLTP2I-X0
8.00 203.0 0.50 12.7 1.91 49.0 40 178 10 100
HLTP3I-X0
12.00 305.0 0.50 12.7 3.18 81.0 40 178 10 100
UL Listed Strip Ties (Black) for plenum applications
HLSP1.5S-X0
6.00 152.0 0.75 19.1 1.50 38.0 50 222 10 100
HLSP3S-X0
12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100
HLSP5S-X0
18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100
Stacked Strip Ties – eliminates cutting ties to length and staging them for each job; rounded edges
for installer safety – 100 pieces
HLB2S-C0*
7.00 178.0 0.75 19.1 1.60 41 50 222 1 10
^Bulk packaging available with 1,000 ties per roll (HLT2I-M0 and HLT3I-M0).
Contact Customer Service for additional information.
Strip Ties – Perforated in convenient 6", 12", and 18" strips
HLS1.5S-X0*
6.00 152.0 0.75 19.1 1.50 38.0 50 222 10 100
HLS3S-X0*
12.00 305.0 0.75 19.1 3.20 81.0 50 222 10 100
HLS5S-X0*
18.00 457.0 0.75 19.1 5.00 127.0 50 222 10 100
Part Number
Length Width
Max.
Bundle Dia.
Min. Loop
Tensile Str.‡
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Ft. m In. mm In. mm Lbs. N
Continuous Rolls – 15' and 75' lengths – can be cut to desired length, eliminating waste
HLM-15R0*
15.0 4.6 0.33 8.4 Various Various 40 178 1 10
HLS-15R0*
15.0 4.6 0.75 19.1 Various Various 50 222 1 10
HLS-75R0*
75.0 22.9 0.75 19.1 Various Various 50 222 1 10
*When ordering colors, replace 0 (Black) with 2 (Red), 3 (Orange), 4 (Yellow), 5 (Green), 6 (Blue), 10 (White); also see color
chart on page 4.
Convenient packaging (100 pieces)
HLB2S-C0
Overhead application
Continuous rolls
HLS-15R6
Underfl oor (Plenum application)
HLSP3S-X12
HLTP3I-X12
Rack application
Continuous rolls
HLS-15R10, HLS-15R6
‡Minimum 2" overlap required to achieve loop tensile rating.