Datasheet

CORP. TINLEY PARK, ILLINOIS
GS2B CUSTOMER DRAWING
UNLESS OTHERWISE SPECIFIED,
DIMENSIONAL TOLERANCES ARE:
(.x) ±
---
(.xxx) ± ---
(.xx) ± --- ANGLES ±
---
UNLESS OTHERWISE SPECIFIED,
ALL DIMENSIONS ARE GIVEN IN
INCHES, THIRD ANGLE
PROJECTION.
DRAWN BY:
BLR
SCALE
NONE
12 2-26-04 BLR ABJ
REDRAWN; CHNG
WEIGHT TO OZ.
4121 -- DLWE
DATE:
2-26-04
REV DATE BY CHK’D DESCRIPTION ECN -R CUST SUP
CHK’D:
ABJ
MATL:
CUSTOMER
DRAWING
DRAWING NO.
GSB-00275A-CD
DWG
A
SIZE
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
6.62” (168.1)
SPECIFICATIONS:
PANDUIT TOOL NO.: GS2B
TOOL WEIGHT: 11.5 oz. (327 gr.)
INSTALLS MINIATURE, INTERMEDIATE AND
STANDARD CROSS SECTION CABLE TIES.
CABLE TIE CROSS-SECTION CODE:
M = MINIATURE
I = INTERMEDIATE
S = STANDARD
THIS MILITARY STANDARD MS-90387-1
TOOL CAN BE USED TO INSTALL THE
FOLLOWING MS STRAPS:
MS-3367-1, -2, -4, -5, -7; AND
MS-3368-1, -2, -3, -4, -5
THIS TOOL TIGHTENS CABLE TIES AND
CUTS OFF EXCESS PORTION WHEN
PRESET TENSION IS ATTAINED.
DIMENSIONS SHOWN IN
PARENTHESIS ARE METRIC
5.10
(129.5)
6.62 (168.1)
3.90 (99.1)
.74
(
18.8
)
.063
.055
(1.60)
(1.40)
.75
(19.1)
.75
(
19.1
)
.64
(
16.3
)
TIP
DEFLECTOR
TENSION
ADJUSTMENT
KNOB
F:/RVUSERS/ENGDOCS/CUSTDWGS/GSB-00275A-CD_12.doc
TENSION
LOCATOR