Cut Sheet

Std.
Ctn.
Qty.
Std.
Pkg.
Qty.
For
Threaded
Rod SizePart DescriptionPart Number
J.33
www.panduit.com
For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see
catalog back cover).
A.
System
Overview
B.
Copper
Systems
C.
Fiber
Optic
Systems
D.
Power
over
Ethernet
E.
Zone
Cabling
F.
Wireless
G.
Outlets
H.
Media
Distribution
I.
Physical
Infrastructure
Management
J.
Overhead &
Underfloor
Routing
K.
Surface
Raceway
L.
Cabinets,
Racks &
Cable
Management
M.
Grounding &
Bonding
N.
Industrial
O.
Labeling &
Identification
P.
Cable
Management
Accessories
Q.
Index
PHYSICAL INFRASTRUCTURE SYSTEMS
4x4 and 6x4 FiberRunner
®
Mounting Brackets (continued)
FR6ACB12
FR6ACB58
FR6ACB12M
FR6ACB58M
FR6TB38
FR6TB12
FR6TB38M
FR6TB12M
FRAFC58
F2PCLB12
F2PCLB58
FR6ACAB
Table continues on next page
Top Support Adjustable “C” QuikLock
™
Bracket for 6x4 and 4x4 Systems
FR6ACB12
Used to support the 6x4 and 4x4 systems from any
new threaded rod extending down directly from the
ceiling, grid, or ladder rack system. Two position height
adjustments to accommodate system with or without
hinged cover. Bracket is secured to threaded rod with
two nuts. The pre-assembled slide clamps enable fast
assembly to channel. Use 7/16" nut driver on
slide clamps.
1/2" 1 —
FR6ACB58
5/8" 1 —
FR6ACB12M
12mm 1 —
FR6ACB58M
16mm 1 —
Trapeze QuikLock
™
Bracket for 6x4 and 4x4 Systems
FR6TB38
Used to support the 6x4 and 4x4 systems by spanning
two threaded rod drops. Can be installed from above
or below. Bracket is secured to each threaded rod
with two nuts. The pre-assembled slide clamps enable
fast assembly to channel. Use 7/16" nut driver on
slide clamps.
3/8" 1 10
FR6TB12
1/2" 1 10
FR6TB38M
10mm 1 10
FR6TB12M
12mm 1 10
Adjustable Cabinet QuikLock
™
Bracket for 6x4 and 4x4 Systems
FR6ACAB
Used to support the 6x4 and 4x4 systems attaching
to the top of cabinets. Adjustable from 4 1/4" (108mm)
to 9" (229mm) allowing runs to be leveled over uneven
cabinet heights. Also allows spillouts such as the
vertical tee to be positioned directly over cable inlets
on cabinet tops. Bracket is secured to the cabinet
frame with through bolts (not included). The
pre-assembled slide clamps enable fast assembly
to channel. Use 7/16" nut driver on slide clamps.
— 1 —
Two-Piece Ladder Rack Bracket for Attaching Threaded Rod to 1 1/2" – 2"
Ladder Rack
F2PCLB12
Two-piece bracket attaches to 3/8" (9.5mm) wide x
1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2” (50.8mm)
ladder rack rail. Bracket halves slide into position and
clamp together on the ladder rack rail, which allows
for a one-handed assembly of the threaded rod (not
included). Contains bracket and hardware for attaching
bracket to ladder rack.
1/2" 1 10
F2PCLB58
5/8" 1 10
Two-Piece Framing Clip for Attaching 5/8" Threaded Rod to 2" x 9/16"
C-Channel Auxiliary Framing Bars
FRAFC58
Two-piece framing clip attaches to auxiliary framing
bars. Framing clip halves slide into position and
interlock on the auxiliary framing bars, allowing
easier assembly of the threaded rod to bars.
Contains two-piece framing clip and hardware
for attaching framing clip to auxiliary framing bars.
(5/8" threaded rod not included.)
5/8" 1 10