Cut Sheet

QuickNet
™
100G MPO Trunk Cable
Assemblies and Adapter Panels
SPECIFICATION SHEET
construction
Cable type:
Indoor Small Diameter Trunk
Cable
jacket ratings:
Low Smoke Zero Halogen (LSZH IEC 60332-
1, 60332-3C, 60754-1, 61034-2)
Optical Fiber Non Conductive Plenum (OFNP)
Fiber types:
Multimode: OM3, OM4
Singlemode: OS1/OS2
Connector
types end ‘A’:
24-fiber: MPO female, MPO male
Connector color
end ‘A’:
Multimode PC: Black and Aqua
Singlemode APC: Black and Yellow
Fiber Count:
24
Polarity:
MPO-MPO: Method A
Jacket color:
OM3/OM4 Aqua
OS1/OS2 Yellow
Connector
types end ‘B’:
24-fiber: MPO female, MPO male
Connector
color end ‘B’:
Multimode PC: Black and Aqua
Singlemode APC: Black and Yellow
application
Allows system design of efficient structured cabling systems in support of 100 Gb/s Ethernet Interconnects (IEEE 802.3ba Clause 86) and
10×10 Gb/s Ethernet Interconnects (802.3ae Clause 52) for Data Aggregation and Super High Density Cabling that service Datacom/Telecom
Switch and Router Connections.
technical information
QuickNet
™
24 Fiber MPO Pre-Terminated Trunk Cable Assemblies allow for rapid deployment of
high-density permanent links for aggregation of 10G Ethernet and higher speed Fiber Channel
Cabling. These cables and adapter panels facilitate direct attach or structured cabling capability
for 100GBASE-SR10 applications and CXP or MXP optics requiring 24 fiber MPO interconnection
at the transceiver media device interface. QuickNet
™
Pre-Terminated Trunk Cable Assemblies
optimize cable routing requirements to ensure efficient use of pathway space and significantly
reduce installation time and cost. QuickNet
™
Pre-Terminated Trunk Cable Assemblies are
built with modular 24 fiber MTP* connectivity and provide compatibility, flexibility and system
performance in cabling applications requiring a TIA-FOCIS 5 compliant 24 fiber MPO interface
at a cabling bulkhead adapter or transceiver receptacle interface. All Panduit
®
QuickNet
™
Trunk
Cable Assemblies are factory terminated and tested to deliver verified optical performance and
reliability for improved network integrity. These trunk assemblies, when deployed in a channel,
provide 40 Gb/s and 100 Gb/s network performance up to 100meters for OM3 and up to 125
meters for OM4 (per the IEEE 802.3ba 40/100 GbE Ethernet standard) while maintaining
compatibility with legacy Ethernet and all ANSI Fibre Channel applications.
physical properties
Cable outside diameter (OD):
5.4mm
Minimum bend radius:
Under load: 20 X Cable OD
Static: 10 x Cable OD
Cable tensile strength:
660N
Cable compressive load:
10 N/mm
Cable flex:
25 cycles
Connector cable retention:
50N
Connector durability:
500 mating cycles
Breakout outside diameter:
3.0mm
Transition outside diameter:
10mm
Pulling eye diameter:
23mm
Cable twist:
10 cycles
Breakout length:
1m
www.panduit.com
optical properties
Maximum cable
attenuation:
Singlemode: 1.0dB/km at 1310/1550nm
Multimode: 3.5dB/km at 850nm
1.5dB/km at 1300nm
Maximum
connector
insertion loss:
Singlemode 0.75dB
Multimode: 0.50dB
Minimum
connector
return loss:
Singlemode: 55dB
Multimode: 26dB
environmental properties
Operating temperature:
0 °C to +70 °C
(32°F to +158°F)
Storage and shipping
temperature:
-40 °C to +70 °C
(-40°F to +158°F)
Installation temperature:
0 °C to +60 °C
(32°F to +140°F)
standards
Meets or exceeds ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5
(FOCIS-5), TIC/EIA-568-C.1, RoHS Complaint