Installation Manual

Easy Connection of

Indoor Network Cameras!

Connecting indoor cameras to

Ethernet network cabling is easy

using Panduit Field Term Plugs!

Easy to Attach Field Term Plug

Loose cable end Strip cable and

attach wire cap

Insert wire cap into

plug housing and

snap together

Plug is ready

Panduit Field Term Plug Options

Made for easy on-site connection of network cabling

• Simple 2-piece plug assembly

• Install reliably in 60 seconds or less

• All plugs work with Category 5e, 6 and Category 6A cables

• Can re-terminate up to 20 times

2 3

Plugs for Unshielded

(UTP) Cabling Installs

Plug for Shielded

Cabling Installs

Accessories

Termination Tool (EGPT)

Test Cord (FP6X88TC)

Straight Shielded Plug

(FPS6X88MTG)

Straight UTP Plug (FP6X88MTG)

45º Angled UTP Plug (FPUD6X88MTG)

Done!

PAGE 1
Easy Connection of Indoor Network Cameras! Connecting indoor cameras to Ethernet network cabling is easy using Panduit Field Term Plugs! Easy to Attach Field Term Plug 1 2 3 Done! Loose cable end Strip cable and attach wire cap Insert wire cap into plug housing and snap together Plug is ready Panduit Field Term Plug Options Made for easy on-site connection of network cabling • Simple 2-piece plug assembly • Install reliably in 60 seconds or less • All plugs work with Category 5e, 6 and Category 6
PAGE 2
AXIS® P3245-LV Example • Example shows cabling fed from behind mounting bracket • Cabling fed from side of camera (direct or in conduit) is similar 1 2 Locate cable stub and slide grommet over. 4 3 1 A 5 B Attach Panduit Field Term Plug to cable. A C Insert cable stub through opening in camera. IMPORTANT B D Insert Plug into port and place grommet into camera unit.