Cut Sheet
Dimensions:
FCE1U, FCE1UA: 1.72"H x 17.6"W x 16.8"D
(43.8mm x 447mm x 426.5mm), 1 RU
FCE2U: 3.47"H x 17.6"W x 16.8"D
(88.2mm x 447mm x 426.5mm), 2 RU
FCE4U: 6.8"H x 17.6"W x 16.8"D
(172.7mm x 447mm x 426.4mm), 4 RU
Mounting:
Integral mounting flange for installation in 19" wide EIA-310 racks
Accessories:
Mounting hardware and accessory kit with labels included
key features and benefits
applications
technical information
specifications
The fiber cassette enclosure shall house, organize, manage and
protect fiber optic cable, terminations, splices, connectors and patch
cords. Enclosure shall accommodate all Panduit pre-terminated
MTP* cassettes, fiber adapter panels (FAP) and fiber mount panels
(FMP), and associated trunk cables, connectors and patch cords,
and shall include integral cable management and bend radius
control for transition to vertical cable managers. Fiber optic
enclosure shall be constructed of steel material. Molded front and
rear doors shall be removable for cabling and connector access and
installation. A flat front door shall enable access to fiber without
moving the drawer. Enclosure shall provide full front access with a
drawer that slides out and tilts down regardless of how many
enclosures are stacked together. 1 RU enclosure shall be available
in an open-access version which allows patch cord access from
both top and bottom of the enclosure housing. Enclosure shall have
multiple knockouts for a variety of trunk cable entry points.
Modular design mounts up to 4
Provides higher patch field density in fewer rack units
Opticom
®
QuickNet
™
Cassettes
saving valuable space
or FAPs per RU
Works with all Panduit
®
Opticom
®
Provides versatility and flexibility with a fully modular solution
QuickNet
™
Fiber Optic Cassettes
for a variety of pre-terminated installations, FAP and field
and Fiber Adapter Panels
termination, and splicing installations. Works with all Panduit
LC, SC, ST, MT-RJ and MTP* fiber adapter panels and cassettes
Hinged, swing down front door
Enables access to fiber optic patch cords without needing to move
drawer for easier moves, adds, and changes; enables stacking for
reduced real estate
Slide-out, tilt-down drawer
Offers total front access to all patch cords and rear cables for
in-cabinet and top-of-rack mounting locations
Integral cable management
Ensures proper cable routing, bend radius control, and rear slack
storage for all patch cords, interconnect cables, and trunk cables
New fiber optic splice module
Can fusion splice up to 96 fibers per RU in a single enclosure with
one-to-one splice-to-patching ratio
TIA-606-A compatible labeling
Standards-based, mechanically printed labeling of fiber
connectivity, patchfields, and enclosures enables clear
and accurate labeling for easy moves, adds and changes
Opticom
®
QuickNet
™
Rack Mount Fiber Cassette
Enclosures provide a system for managing fiber
terminations, connections, and patching in all types
of applications. The enclosures are a component of
the Opticom
®
QuickNet
™
Fiber Cabling System. They
are ideal for fast, reliable patch field creation in
cross-connect or inter-connect main distribution
areas (MDA) or horizontal distribution areas (HDA)
for storage area network (SAN) patching. The
enclosure can also serve as a transition point for
pre-terminated MTP* interconnect or trunk cables
patched to active equipment in data center server
cabinets or LAN switch racks. The enclosures
provide high patch field densities with the FCE1U
housing up to 96 fibers in 1 RU, the FCE2U housing
up to 192 fibers in 2 RU, and the FCE4U housing up
to 288 fibers in 4 RU. Integral cable management,
bend radius control, and slack management features
protect fiber optic cables, patch cords, and
connectors to ensure end-to-end signal integrity.
Opticom
®
QuickNet
™
Cassettes Optimized
10Gig
™
50/125µm OM3/OM4 Multimode Fiber
12 duplex LC to 2 MTP*:
FCXO-24-10Y
6 duplex LC to 1 MTP*:
FCXO-12-10Y
6 duplex SC to 1 MTP*:
FCXO-12-3Y
Opticom
®
QuickNet
™
Cassettes
10Gig
™
50/125µm OM3/OM4 Multimode Fiber
12 duplex LC to 2 MTP*:
FCX-24-10Y
6 duplex LC to 1 MTP*:
FCX-12-10Y
6 duplex SC to 1 MTP*:
FCX-12-3Y
Opticom
®
QuickNet
™
Cassettes
50/125µm OM2 Multimode Fiber
12 duplex LC to 2 MTP*:
FC5-24-10Y
6 duplex LC to 1 MTP*:
FC5-12-10Y
6 duplex SC to 1 MTP*:
FC5-12-3Y
Opticom
®
QuickNet
™
Cassettes
9/125µm OS1 Singlemode Fiber
12 duplex LC to 2 MTP*:
FC9-24-10Y
6 duplex LC to 1 MTP*:
FC9-12-10Y
6 duplex SC to 1 MTP*:
FC9-12-3Y
Opticom
®
Fiber Adapter Panels
12 duplex LC, 10Gig
™
:
FAP12WAQDLC
6 duplex LC, 10Gig
™
:
FAP6WAQDLC
12 duplex LC:
FAP12WEIDLC
6 duplex LC:
FAP6WEIDLC
6 duplex SC, 10Gig
™
:
FAP6WAQDSC
3 duplex SC, 10Gig
™
:
FAP3WAQDSC
6 duplex SC:
FAP6WEIDSC
3 duplex SC:
FAP3WEIDSC
6 simplex ST:
FAP6WST
6 duplex MT-RJ:
FMP6WMTRJ
Opti-Core
®
Patch Cords
12 fiber MTP* to MTP*:
F^12D5-5M**Y
Duplex LC to LC:
F^E10-10M**Y
Duplex SC to SC:
F^D3-3M**Y
Duplex SC to LC:
F^D3-10M**Y
Splice Modules and Holders
Splice module (fusion):
FOSMF
Splice module
(mechanical):
FOSMM
Splice module
holder for FCE1U:
FOSMH1U
Splice module
holder for FCE2U:
FOSMH2U
Splice module
holder for FCE4U:
FOSMH4U
Tools and Accessories
Panduit connector
removal tool:
PCRT
Fiber slack spool 1 RU:
FMS1
Fiber slack spool 2 RU:
FMS2
Bend radius clip:
FEBRC
^Substitute for fiber type:
X = (OM3/OM4 – 10Gig
™
50/125 µm);
5 = (OM2 – 50/125 µm);
6 = (OM1 – 62.5/125 µm);
9 = (OS1 – 9/125 µm)
**Substitute for length in meters; 1, 2, 3, 5 and
10 are standard lengths.
Contact Panduit Customer Service for other
available lengths.
Opticom
®
QuickNet
™
Rack Mount
Fiber Cassette Enclosures
1 RU for 4 FAPs or
cassettes:
FCE1U
1 RU for 4 FAPs or
cassettes, open access:
FCE1UA
2 RU for 8 FAPs or
cassettes:
FCE2U
4 RU for 12 FAPs or
cassettes:
FCE4U
*MTP is a registered trademark of US Conec Ltd.
Opticom
®
QuickNet
™
Rack Mount
Fiber Cassette Enclosures
www.panduit.com
SPECIFICATION SHEET