Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

FS128B

Page 8 of 16

The patch panel trunk plate compatible with rear covers can be installed in the same fashion as the enclosure trunk slack plate explained

previously. Engage the pins on the plate into the slots on the enclosure and tilt down into place. Tighten the captive screws to secure.

4RU patch panel with trunk slack plate compatible with rear cover installed

2RU patch panel with trunk slack plate compatible with rear cover installed

1RU patch panel with trunk slack plate compatible with rear cover installed

Optional divider

plate

Optional divider

plate

Optional divider

plate

Trunk slack plate

compatible with

rear cover

Trunk slack plate

compatible with

rear cover

Trunk slack plate

compatible with

rear cover

Tighten captive screws on

both sides to secure

Tighten captive screws on

both sides to secure

Tighten captive screws on

both sides to secure

Back waterfall

(Rack removed from view for clarity)

1RU HD Flex patch panel

2RU HD Flex patch panel

4RU HD Flex patch panel

Figure 20