Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

FS128B

Page 5 of 16

Reconfiguring patch panel to accept 12-Port or 4-Port Modules

Figure 10

Select the rail to be removed. Pull up on the rail to be removed

by gripping the end of the latch.

Figure 11

While continuing to apply upward pressure on the rail being

removed, pull the rail forward. As the rail begins to move it will

disengage from the tray and be free to remove completely.

Figure 12

triangular cutout

To install rail onto tray, align rail between triangular cutouts and

reverse the removal process. The posts on the bottom of the rail

will drop into the cutouts in the tray. As the rail is pushed toward

the back of the tray, the posts will engage the tray. Once the rail

is fully re-inserted the front of the rail will snap into position. Pull

forward on the rail to ensure it is properly installed.