Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2018
FS128B
Page 2 of 16
If RU space is open above patch panel location,
partially install two screws, one on each side of the
rack. These partially installed screws will assist in
mounting the patch panel to the rack.
• For all patch panels pre-install two screws in the
bottom hole location of the rack position desired.
If RU space is not
open above patch panel location,
do not pre-install screws. Place patch panel into
position and secure with a minimum of four screws.
Rack Mounting
1RU
2RU
Figure 2
Figure 3
For the pre-installed screws mounting method, place
patch panel into rack and allow patch panel mounting
brackets to rest on the partially installed screws.
Install the remaining screws and tighten all to secure the
enclosure. Use a minimum of four screws.