Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

FS128B

Page 15 of 16

Optional HD FLex Front Manager Cable Routing

Cable Support Bracket

Bend Radius Clip

Labeling Space

Door Latch

Figure 34

To open the door, hold down the door latches and

swing door open.

Figure 35

The patch cords may be routed, through the bend

radius clips, to both sides (recommended) and

secured with Tak-Ty. (See Figure 35.) The cable

support bracket may be removed to improve access.

To remove the cable support bracket, pull up on the

front of the bracket (1), then slide the bracket out,

toward the front of the unit (2). (See Figure 36.)

Figure 36

Figure 37

The patch cord may also be routed, through the bend

clip radius clips on one side only. (See Figure 37.)The

patch cords, on the far side of the bend clip radius

should rest on the cable support bracket. Cables

should be secured with Tak-Ty.

Cable support bracket