Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

FS128B

Page 14 of 16

Mounting bend radius clips:

Figure 32

Bend Radius Clips

Figure 33

Clip Latch Slot

Attachment point

Clip Latch

Mount the bend radius clips to the attachment points

on each side of the cable manager. The bend radius

clips must be installed with the cable slot facing

forward. Verify that the clip latch snaps into the mating

slot. If required, the bend radius clips can be removed

by prying the latch out of the slot.