Submittal

OptiCam 2 FS133 Termination Tool User Manual
- 23 -
Cam Connector
LC Camming requires that the whole connector rotate. When the screen displays the CAM & Test
command, A) Maintain gentle forward pressure on the field fiber, and B) “Cam” the connector, then
select the Next arrow to perform the test.
SC Camming requires that the key “Fin” rotates, and the rest of the connector remains in place.
Note: This image shows the new metal ferrule adapter for LC launch cords.
Detail A
ST Camming
ST Camming is done by rotating the key lever of the cradle, which engages the internal camming parts of the connector.
Review Test Results
Verify that the IL value meets project requirements.