Submittal

OptiCam 2 FS133 Termination Tool User Manual
- 21 -
OptiCam 2 Tool Operation - LC
Select Connector Options
1. Use the navigation button to navigate to the menus and to “Connector Type”, and select the correct connector options:
Menu > Connector Type.
2. Use the navigation button to select the correct information. The selected text will become red. Click Save.
The orientation of the connector indicates the direction that the fiber is inserted from. If Auto is selected, the tool
will determine this orientation automatically.
Note: To ensure proper function of the tool, check that settings on the tool match the cord, cradle, con-
nector, and orientation being used.
Load Connector
A) Insert a connector while the launch cord is tilted up to receive the connector. B) Tilt the connector down, ensure the con-
nector backbone snaps in to the cradle.