Installation Manual

E-mail:
[e-mail]
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
Page 2 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012
FS037A
www.panduit.com
Page 2 of 2
3.1 Insert the QuickNet MPO cassette through the cassette mounting bracket and secure by locking the plastic rivets.
3.2 Feed one end of the MPO/MTP* patch cord though the desired grommet location and connect to the rear MPO adapter
of the cassette.
3.3 Route and connect the free end of the MPO/MTP* patch cord to the appropriate equipment.
3.0 Cassette Installation for Opticom Enclosures
Cassette Mounting
Bracket
* MTP is a registered trademark of US Conec Ltd.
4.1 Insert the QuickNet MPO cassette through the panel opening and secure by locking the plastic rivets.
4.2 Connect the MPO/MTP* patch cord to the rear MPO adapter of the cassette.
4.3 Route and connect the free end of the MPO/MTP* patch cord to the appropriate equipment.
4.0 Cassette Installation for Opticom Patch Panels
MPO Cassette
To Equipment
MPO/MTP*
Patch Cord
MPO Adapter
To Equipment
MPO/MTP*
Patch Cord
Plastic Rivets
Plastic Rivets