Cut Sheet
C.27
www.panduit.com
For service and technical support, call 866-405-6654 (outside the U.S. and Canada, see catalog back cover).
A.
System
Overview
B.
Copper
Systems
C.
Fiber
Optic
Systems
D.
Power
over
Ethernet
E.
Zone
Cabling
F.
Wireless
G.
Outlets
H.
Media
Distribution
I.
Physical
Infrastructure
Management
J.
Overhead &
Underfloor
Routing
K.
Surface
Raceway
L.
Cabinets,
Racks &
Cable
Management
M.
Grounding &
Bonding
N.
Industrial
O.
Labeling &
Identification
P.
Cable
Management
Accessories
Q.
Index
PHYSICAL INFRASTRUCTURE SYSTEMS
ST Fiber Optic Connectors – Field Polish Termination
• TIA/EIA-604 FOCIS-2 compatible connectors
• Exceed TIA/EIA-568-B.3 requirements
• Insertion loss: 0.15dB average (multimode), 0.20dB
average (singlemode)
• Return loss: >20dB (multimode), >40dB (singlemode)
• Each connector includes metal connector body/ferrule
assembly, spring, metal bayonet, crimp sleeve, one boot
for 900μm buffered fiber, one boot for 3mm jacketed
cable, and one dust cap
• Fiber cable type: tight-buffered recommended
• Fiber cable size: accept 3.0mm jacketed cable or 900μm
buffered fiber
• For 250μm coated fiber termination, use 250 micron fiber
build-up tube kit or fan-out kits on pages C.27 – C.28
• Ferrule type: 2.5mm zirconia ceramic (highest durability
for repeated matings)
• Field polish termination – Panduit recommends
anaerobic adhesive on pages C.103, C.104
• Use field polish termination kit (FIELDKIT) on pages
C.103, C.104 of SA-NCCB51
Part Number Part Description Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
ST Multimode Fiber Optic Connectors
FSTMABL ST multimode simplex fiber optic connector for 3.0mm
jacketed cable or 900μm buffered fiber installation.
Black 1 10
FSTMARD Red 1 10
ST Singlemode Fiber Optic Connector
FSTSABU ST singlemode simplex fiber optic connector for 3.0mm
jacketed cable or 900μm buffered fiber installation.
Blue 1 10
FSTMABL
FSTMARD
FSTSABU
250 Micron Fiber Build-Up Tube Kit
• Includes 100 build-up tubes and supplemental instructions
for terminating Panduit field polish, Opti-Crimp
®
,
or
OptiCam
®
Fiber Optic Connectors onto 250μm
coated fiber
• Used with 900μm boots included with connectors and the
current fiber optic termination kit
Part Number Part Description
Std.
Pkg.
Qty.
F250BT-C 250 micron fiber build-up tube kit; includes 100 build-up tubes and
supplemental installation instructions.
100