manual

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

V00029ES

Page 1 of 4

DIFBA3003S00S

(installed in Net-Access

S-Type Server Cabinet)

Switch Inlet Duct

(DIFBA3003S00S)

Cisco Nexus 93128 Switch

(reference)

PAGE 1
Switch Inlet Duct (DIFBA3003S00S) © Panduit Corp. 2014 INSTALLATION INSTRUCTIONS V00029ES Cisco Nexus 93128 Switch (reference) DIFBA3003S00S (installed in Net-Access S-Type Server Cabinet) FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.
PAGE 2
V00029ES INSTALLATION INSTRUCTIONS Prepare Switch for Ducting Installation -Remove bottom screws from front of switch rails and discard. FRONT OF CABINET Install Cage Nuts -Insert [4] Bonding cage nuts per equipment rail in rack space immediately above switch rails, at front of cabinet [4] Bonding Cage Nuts (install in Rack Space above switch rails) Intended Mounting Location (3 rack spaces) FRONT OF CABINET For Technical Support: www.panduit.com/resources/install_maintain.
PAGE 3
V00029ES INSTALLATION INSTRUCTIONS Install Switch Ducting -Secure DIFBA3003S00S switch ducting to equipment rails with [8] new screws and the two bottom screws taken out earlier.
PAGE 4
INSTALLATION INSTRUCTIONS V00029ES Routing of Switch Power Cable -Route switch power cable through power grommet (located on either side of DIFBA3003S00S).