Datasheet

6
visit www.panduit.com/datacenter
Panduit Pre-Configured Physical Infrastructure for
the Cisco
®
* Nexus 7009 Switch
The Cisco
®
Nexus 7009 Switch enables data center stakeholders to deploy a highly scalable 10 Gigabit Ethernet (GbE) network that supports
virtualization technologies for consolidation of multiple applications over a smaller number of more powerful servers and switches. All cabinet
versions of Panduit pre-configured offerings for the Nexus 7009 include newly designed intake duct to optimize cooling airflow.
Panduit Pre-Configured Physical Infrastructures support the deployment of Cisco
®
Nexus 7009 Switch platforms with pre-assembled
configurations that are offered in versions that meet typical copper and fiber I/O module provisioning schemes including:
• “Medium Fiber” for switch provisions requiring up to (4) 32-port fiber I/O Modules
• “Medium Copper” for switch provisions requiring up to (4) 48-port copper I/O Modules
• “Heavy Copper” for switch provisions requiring up to (6) 48-port copper I/O Modules
Part Number Description
CQ7009B
“Base” Pre-Configured Physical Infrastructure for Cisco
®
Nexus 7009 with Net-Access
™
N-Type Cabinet, side
panels, POU brackets, and intake ducting, as well as all necessary cable management, grounding jumpers and patch panels.
1
Std.
Pkg.
Qty.
CQ7009C4
“Medium Copper” Pre-Configured Physical Infrastructure for Cisco
®
Nexus 7009 with Net-Access
™
N-Type Cabinet,
side panels, POU brackets, and intake ducting, as well as all necessary cable management, grounding jumpers, patch panels,
and copper Category 6A white patch cords (bulk packaged to accommodate four copper I/O Modules).
1
CQ7009F4
“Medium Fiber” Pre-Configured Physical Infrastructure for Cisco
®
Nexus 7009 with Net-Access
™
N-Type Cabinet, side
panels, POU brackets, and intake ducting, as well as all necessary cable management, grounding jumpers, patch panels, and
MTP-LC Hydra cable assemblies (bulk packaged to accommodate four fiber I/O Modules).
1
CQ7009C6
“Heavy Copper” Pre-Configured Physical Infrastructure for Cisco
®
Nexus 7009 with Net-Access
™
N-Type Cabinet, side
panels, POU brackets, and intake ducting, as well as all necessary cable management, grounding jumpers, patch panels,
and copper Category 6A white patch cords (bulk packaged to accommodate six copper I/O Modules).
1
*Cisco
®
Nexus 7009 Switch not included in the part numbers above. The above diagram is assembled per the application note. Panduit Pre-Configured
Physical Infrastructures are shipped on standard pallets. For applications that require shock-resistant packaging to facilitate pre-mounting of active
electronics, please contact customer service.
Nexus 7009 Pre-Configured Physical Infrastructure shown.
(Connectivity is offered as an option.)