Cut Sheet

ManualsBrandsPanduit ManualsConnectorsClear HTAP Cover for HTCT #2 AWG

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)

ELECTRICAL SOLUTIONS

B2.

Cable

Accessories

C1.

Wiring

Duct

C3.

Abrasion

Protection

C4.

Cable

Management

D1.

Terminals

D2.

Power

Connectors

E1.

Labeling

Systems

E2.

Labels

E3.

Pre-Printed

& Write-On

Markers

Index

B3.

Stainless

Steel Ties

C2.

Surface

Raceway

E5.

Lockout/

Tagout

& Safety

Solutions

B1.

Cable Ties

System

Overview

D3.

ounding

onnectors

E4.

Permanent

Identific

ation

Black Covers for Copper HTAPs and CTAPs

Clear Covers for HTCT HTAPs

Type CLRCVR

• Made of high impact plastic to provide high impact strength and

360° inspections of crimped connection to assure the crimp is

complete and the correct die was used

• Incorporate dual self-latching spring loaded latches and supplied

with two Panduit UL 94 V-0 cable ties to allow for easy snap-on

assembly and ensure covers are secured

• Low profile design minimizes space requirements

• Each cover half supports installation information labels inside

plastic retainer strips to allow labels to be viewed on either side of

cover and to protect labels from being removed

• Incorporate molded in flash barriers which encompass the HTAP

installation providing protection against electrical flash over

• UL 94 V-0 flame rating and oxygen index of 28 providing

self-extinguishing, flame retardant properties

• Part number, voltage rating, temperature rating and HTCT part

number molded into cover for easy identification

• See page D3.33 for detailed installation instructions

• Used to insulate connectors and protect tap connections from

corrosive environments

• UL Listed and CSA Certified with appproved connectors for use up

to 600 V and temperature rated to 90° C

• Made of durable, weather-resistant black polypropylene

• Double locking latches provide secure cover installation

Part Number Use with HTAP Part Number

Figure Dimensions

In. (mm)

Std.

Pkg.

Qty.

L W H

CLRCVR1-1

HTCT6X-6X 4.48

(113.8)

1.41

(35.8)

1.20

(30.5)

CLRCVR2-1

HTCT2-2 5.10

(129.5)

1.66

(42.2)

1.40

(35.6)

CLRCVR3-1

HTCT250-2, HTCT250-250 5.35

(135.9)

2.16

(54.9)

1.40

(35.6)

For information on copper HTAPs, see page D3.14

For information on copper CTAPs, see page D3.12

*Not CSA Certified.

Part Number Use with CTAP Part Number Use with HTAP Part Number

Figure Dimensions

(In.)

Std.

Pkg.

Qty.

L W H

CVR6-1

CTAP4-8-L, CTAP4-6-L, CTAP4-4-L HTCT6X-6X-1 2.00 1.20 1.26 1

CVR2-1

CTAP2-4-Q, CTAP2-2-X, CTAP2/0-2-X HTCT2-2-1 3.38 1.40 2.00 1

CVR250-1

CTAP2/0-2/0-X HTCT250-2-1, HTCT250-250-1 3.38 1.55 2.05 1

CVR500-1*

CTAP4/0-2-X, CTAP4/0-2/0-X, CTAP4/0-4/0-X — 3.86 1.97 2.66 1

CVR1000-1*

— — 5.62 2.45 3.72 1