Cut Sheet

www.panduit.com For service and technical support, call 1-800-PANDUIT.
7
For service and technical support, call 1-800-PANDUIT.
7
Part Number Nominal Width mm Height Nominal Depth mm Side Panels Color Ramp
S7222BDHRSP
700 42 RU 1200
2
Black
Yes
S7222BDHSP No
S7229BDHRSP
0
Yes
S7229BDHSP No
Net-Access
™
Dynamic Cabinets
● Outset post design
● Welded and assembled steel frame construction
● Easy maintenance powder coat finish
● Adjustable rear equipment rails with
continuous positioning
● Fixed front equipment rails
● Integral vertical airdams with covered cable
pass-through openings
● Large cable entry/cable access
● Single hinge perforated front door with keyed
swing handle
● Split hinge perforated rear door with keyed swing handle
● Optional split side panels on both sides with dual latches
and keyed lock
● Two sets of PDU mounting brackets
● High density cable management fingers (SN25F)
● Select cable entry holes are equipped with plastic sealing
plugs, others have cutouts
● Static load of 1,361kg (3,000 lbs.)
● Rolling load of 1,136kg (2,500 lbs.)
● Dynamic shipping load of 907kg (2,000 lbs.)
● EIA-310-E compliant
● Fully integral bonded without the use of grounding
wires - equipment rails, door and side panels
● Hardware kit: M6 screws and cage nuts
● Factory installed casters, swivel in the rear and fixed in
the front
● Adjustable leveling legs
● Single point grounding locations at bottom of cabinet
The Net-Access
™
Dynamic Cabinet is designed to allow the cabinet to be installed with equipment at one facility and safely
shipped to another location. This is the ideal cabinet for System Integrators or Value Added Resellers as it allows the
equipment to be pre-installed, cabled and ready for quick deployment. The heavy duty reinforced frame has been tested
and approved to support the additional weight of equipment. A heavy duty shock pallet allows the cabinet to be shipped
with equipment. The optional reusable ramp allows the cabinet to be easily unloaded from the pallet.