Cut Sheet

28
Direct Hot Air to Where it Needs to Exhaust
Net-Direct
™
Exhaust Ducts direct hot exhaust
air out of a cabinet away from adjacent devices
within non-contained environments
● Exhaust duct solutions channel hot exhaust air directly to the hot aisle,
away from the cold air inlet of adjacent switches
● Exhaust ducts are completely passive, requiring no energy to operate
and eliminating a point of failure
● Ensures switch exhaust airflow is directed to the hot aisle enabling
effective deployment of network switches with a standard hot aisle/
cold aisle configuration
● Exhaust ducts enable reduced fan power energy consumption by
allowing lower fan speeds, improving the reliability of the switch
Available for: Cisco^ Nexus and Catalyst Switches.
Patented* In-Cabinet Ducting optimizes cooling system eciency by establishing
front-to-back airow patterns through the cabinet.
Direct Cold Air to Where it is Needed
Net-Direct
™
Inlet Ducts enable optimized
containment by effectively directing airflow to
improve network reliability
● Inlet duct solutions deliver cooling air directly from the cold aisle into the
intake fans of switches
● Inlet ducts are completely passive, requiring no energy to operate and
eliminating a point of failure
● Ensures front to back cooling airflow which enables an effective
deployment of network switches with a Net-Contain
™
Cold Aisle
Containment deployment
● Inlet ducts enable reduced fan power energy consumption by allowing
lower fan speeds, improving the reliability of the switch
Available for: Cisco^ Nexus, Catalyst and MDS Switches and Juniper Networks^^ EX Series Switches.
28
^Cisco, Catalyst, and Cisco Nexus are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
^^Juniper Networks is a registered trademark of Juniper Networks, Inc.
*Patents #8,035,965, #7,855,885 and #7,595,985 - Network Cabinet with Thermal Airflow Management System.