Cut Sheet

20
Net-Contain
™
Universal Containment System
The Universal Containment System allows
user to go back and reclaim underutilized
cooling capacity, reduce energy expense
and reduce OpEx by retrofitting the existing
data center with an innovative containment
system. The system includes independent
support structure, sliding doors, vertical
blanking panels, and
roof structure.
This offering can be configured in Vertical
Wall (Hot Aisle Containment) and Roof
Containment (Cold Aisle Containment) and
allows the addition of cabinets (Panduit or
non-Panduit) of varying sizes and design as
needs dictate, reducing deployment time and
capital investment.
Vertical Wall Containment
Typically used for Passive Hot Aisle Containment or
Ceiling Discharge Cold Aisle Containment.
Roof Containment
Typically used for Passive Cold Aisle Containment;
deployed either on raised floor or within-row cooling.
1
6
5432
11
10
98
7
Part Number Description
1
CUEFRT**^^
End of row frames form the Universal Aisle Containment structure at each end of a containment pod.
2
CUWBPS**ST02^^
Wall beam used to help create the UAC frame; configurations of 4 available wall beams will allow all
aisle lengths to be contained.
3
CUSMPR52ST01^^
Mid-span post that provides structural support to the UAC frame; required for every 2400 mm on partially
populated row.
4
CURFS06F**HB^^
Integral ceiling structure used for aisle containment and mounted onto the top of the UAC frame.
5
CUTBPR0610HBN1
Top of cabinet blanking panel used to fill gaps above cabinets; needed when cabinet height is less than
UAC frame size.
6
CUFBPR**06HB^^
Full blanking panel used to fill gap in containment where cabinets have not been deployed; mount
directly under UAC frame.
7
C2HACERI1626^^
End of row adjustable vertical wall used to seal at the end of the UAC and mounted above end of row
frame for aisle containment.
8
C2HAC**I1626^^
Adjustable vertical wall mounted onto UAC frame to seal gap up to ceiling plenum in aisle containment.
9
CUVWB12S12ST^^
Vertical wall brace is mounted across the aisle between wall beams to provide extra stability in aisle
containment.
10
CUVWA**S**ST^^
Vertical wall adapter used to mount Vertical Walls to UAC frame in aisle containment.
11
CUD*SD^1
Dual sliding doors provide thermal seal at the end of the row and attach to the end of row frames.
^^B1 = Black, W1 = White.
**Please reference www.panduit.com for information on the Net-Contain Universal Containment System.