User Guide
Peripheral devices, designed to expand the functional of the Pandora security system or to work separately
with the direct control by the mobile application Pandora Relay (iOS/Android).
Available functions of the system: LIN - digital control of the engine heaters, IN BT1 / IN BT2 - programmable
inputs, CH BLE R1 - programmable built-in relay.
Available functions of the application: CH BLE R1 - constant or timed (1 - 60 sec) control of the built-in relay.
SPECIFICATION
Nominal voltage: +12V
Current consupmtion of the relay: <1mA
Switching current of the built-in relay:
min 10mA, nom 1A, max 2A
2,4 GHz radio protocol: Bluetooth 4.2 Low Energy
Degree of protection: IP64
Operating temperatures: from -40°C to +85°C
Dimensions: 39x16x13
Radio relay BT-02
DO NOT SHIELD!
Antenna 2,4 GHz
nom 1A
max 2A
4 5 6
9 10 11
1
2
3
4
5
6
7
8
9
10
11
red
brown
white
green/black
green/red
green
black
green/yellow
blue/black
blue/red
blue
}
nom 1A
max 2A
}
Connect
for programming
POWER SUPPLY +12V
GROUND
LIN/PROGRAMMING
IN BT1 (-)
IN BT2 (-)
CH BLE R1 – NC2
CH BLE R1 – COM2
CH BLE R1 – NO2
CH BLE R1 – NC1
CH BLE R1 – COM1
CH BLE R1 – NO1
PROGRAMMING
1. Enter the programming level №10.6 (see «Programming table» section of the system manual)
or use the «Pairing» function in the Pandora Specialist mobile app (go to «Advanced mounting»->
«Bluetooth»-> «Pairing, unpairing devices»).
2. Connect the wire №1 (red) to a reliable +12V power supply.
3. Connect the wire №7 (black) with the wire №8 (green/yellow). Connect them to the grounded spot
of a vehicle.
4. The successfull pairing will be confirmed by the sound signal of the Siren/Beeper, or by a request to pair
the device in the mobile app Pandora Relay.
5. Disconnect the wire №8 (green/yellow), insulate all unused wires.
!
THE RADIO RELAY COULD BE PAIRED WITH ONLY ONE SECURITY SYSTEM OR A SMARTPHONE.
COMPATIBILITY
The BT-02 is fully compatible with Pandora
security systems with Bluetooth modem
firmware v4.11 and higher: Pandora Elite
v.2, Pandora Smart Pro v.3.