User Manual

1716

USER MANUAL

PANDORA MINI V4 CAR SERVICESECURITY SYSTEM

III

CONTROL BUTTONS – this panel is used to control a system using but-

tons. To activate or deactivate a function, press and hold the button until the

scale is fully loaded.

Control buttons

Arm/Disarm buttons Engine preheater control button

Time channel control buttons Trunk control button

PANIC mode button Service mode button

Update current state button

NOTE! YOU CAN CHANGE BUTTON LAYOUT IN THE SETTINGS->CONTROL BUT TONS.

CONTROL OVER THE SYSTEM

Arming

To arm the system when the ignition is off, use one of the methods described

below. The system will confirm the command receiving with 1 short sound sig-

nal and 1 flash of turn indicators.

SLAVE mode

This mode allows arming using special analog inputs or digital connections to

a car. To arm the system, shortly press the “Lock” button on an original remote

control or use a sensor/button on a door handle (for cars with an intelligent

access system).

NOTE! ADDITIONAL SET TINGS OR CONNECTIONS ARE REQUIRED FOR THIS MODE.

Mobile application

Open the mobile application. When the system is active, press and hold the

button

on the control panel until the scale is fully loaded

Radio tag

A radio tag must be in the Bluetooth coverage area. Shortly press the control

button on the tag.

HandsFree mode

Move with a remote tag (or a paired mobile phone) away from your vehicle

NOTE! ADDITIONAL SET TINGS ARE REQUIRED FOR USING THE HANDSFREE MODE WITH

A MOBILE PHONE.

Doors are locking

System is arming

1 ﬂash

SLAVE

HANDS FREE

MOBILE APP