User Manual

1110
USER MANUAL
PANDORA MINI V4 CAR SERVICESECURITY SYSTEM
• Control button
• Built-in LED indicator “SEND”
• Built-in accelerometer
• Battery CR 2032
• 2.4 GHz radio frequency (dialog encryption AES-128)
• Bluetooth-protocol
Functions of the button
ACTION FUNCTION
- briey
(ignition is o)
Arm/disarm
- hold for 3 seconds
(system is disarmed)
Activate/deactivate Service mode
- hold for 6 seconds Pair a tag with the base unit
- hold for 10 seconds Firmware update
Light indication of SEND LED
SIGNAL DESCRIPTION
1 ash Arming/disarming
Conrmation of arming
Low battery level (when installing a battery)
2 ashes Conrmation of disarming
3 ashes Battery is charged (when installing a battery)
faded Battery is discharged (when installing a battery,
when pressing the button)
Replacing an immobilizer tag battery
• Unscrew the screw with a Philips PH00 screwdriver (fig.1);
• Slide the battery cover in the direction shown by the arrow (fig. 2);
• Remove the battery and install a new one in accordance with the correct
polarity;
• The SEND indicator will produce 3 red lights if a quality battery is installed;
• Assemble the tag in the reverse order.
• The tag can be operated as usually after finishing the procedure.
Battery
CR 2032
(-) side
SEND – three flashes
-
СR2032
SEND
LED indicator
Control button
WARNING! It Is
Not RecommeNded
to plAce the tAG
Next to metAl
objects, mAGNetIc
ANd electRoNIc
devIces(mAGNetIc
ANd cRedIt cARds,
phoNes, keys,
key fobs, etc.)
foR coRRect op-
eRAtIoN. do Not
expose the tAG
to hIGh tempeRA-
tuRes, moIstuRe.
It Is RecommeNded
to plAce the tAG
oN the belt oR IN
the fRoNt pocket
of youR clothING
g.1
g.2